| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| Cincinnati CNC Discuss Cincinnati CNC machines here. |
| | |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
 
08-10-2011, 10:53 AM
| |||
| |||
Hello, My normally open (first) overtravel signal is not getting through, so it hits the hard stop switch and flags out. I have pulled the switch and it ohms out properly, so might be the cable. I am trying to track the cable through the back cabinet, but does anyone know if it goes to the axis control or to a different board where I can test it? Thanks  |
|
#2
08-10-2011, 11:19 AM
| |||
| |||
| Update--- I found the cable on the input board and checked ohms -- no continuity where the table was parked, but got continuity after moving the table, so looks like the cable is the problem. I may try to align the machine a few times and see if I get lucky with it making contact just to get back to work for now, but will have to replace the cable soon. Anyone know what cable numbers I need to find replacement? I assume it has to be hi-flex? Thanks |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Home/overtravel problem on Feeler Fanuc Oi-Mc | zarl | General Metal Working Machines | 2 | 03-10-2011 03:33 AM |
| Z Axis home position problem Arrow 500 | BSavulis | Cincinnati CNC | 23 | 03-09-2011 09:39 AM |
| Arrow 1000 Y axis problem / Vickers AS10300 codes | Chaz | Cincinnati CNC | 1 | 07-01-2010 03:09 PM |
| Need Help!- Overtravel Problem | mbpp | Fanuc | 4 | 04-12-2008 10:30 PM |
| Bridgport Interact 316 overtravel problem | mbpp | Bridgeport and Hardinge Mills | 2 | 04-02-2008 08:13 AM |
| | |
Linear Mode
