I am fitting a vortec cool air blast to my spindle and wanted to connect it to the air manufold inside on the right next to the 4th axis connectors. It looks like this is being fed through a solenoid in the top of the machine but the air is on all the time. Is there a code to control this solenoid (looks like the solenoid is dedicated to this inside air manifold). Since the vortec uses a lot of air, I really want the ability to program when it is on.
While I'm asking about control codes: Is there a Gcode that controls the work light? I have the programming manual but can't find any reference to controls for the light or the cabinet air.