Need Help! Cincinnati Sabre 500 -Heidenhain 415BR The machine doesn't load the PLC


Results 1 to 2 of 2

Thread: Cincinnati Sabre 500 -Heidenhain 415BR The machine doesn't load the PLC

  1. #1
    Registered
    Join Date
    Oct 2017
    Location
    Poland
    Posts
    3
    Downloads
    0
    Uploads
    0

    Default Cincinnati Sabre 500 -Heidenhain 415BR The machine doesn't load the PLC

    Hello,
    I have a great request for help with me on the steering.
    I bought a machine on the Heidenhain415BR .
    After the purchase she was waiting for the power from the power plant (connection) today I connected her
    And when I turn on I see only the main screen (on) memory test.

    I have already replaced the 3 pin batteries but it did not produce any results.
    Pressing CE or any button does not produce any effect.

    Regards Dariusz

    Similar Threads:
    Attached Thumbnails Attached Thumbnails Cincinnati Sabre 500 -Heidenhain 415BR The machine doesn't load the PLC-20171018_175309-jpg  


  2. #2
    Registered
    Join Date
    Oct 2017
    Location
    Poland
    Posts
    3
    Downloads
    0
    Uploads
    0

    Default Re: Cincinnati Sabre 500 -Heidenhain 415BR The machine doesn't load the PLC

    Please help me .



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Cincinnati Sabre 500 -Heidenhain 415BR The machine doesn't load the PLC

Cincinnati Sabre 500 -Heidenhain 415BR The machine doesn't load the PLC