Avenger 200C fault and some strange things...

[mm440]

Hi all,
I bought a Cincinnati Milacron Avenger 200C lathe, with (strange) part cather option, but without any manuals... It have some trouble...
1. On booting all tests are passed and "Host control initialize" is flashing. After a few turn off, or reset the machine is wake up.
2. When the machine is wake up, there have 2 fault message: W-AXIS circuit fault, Alarm number 00453. When i push the alert reset/data reset, after Alert number is: 19099.

My questions:
1. Where can i get manuals?
2. How can i solve that problems?

The controller is Acramatic 850SX, the servos are Siemens 6SN611.
I did change the drives and motors already and the fault message is same.

Thank You and sorry for my poor english.

Similar Threads:

• Need Help!- G540 always in fault - red LEDS - strange voltages
• Need Help!- SLAmstepper doing strange things....
• Strange things happening here in Maine!!!!
• puma 200c Qsetter

[ibrahimerez]

dear mm440

Did you find the cause of the problem?
I'm having the same problem. please help me.

I am having trouble for turning the cincinnati Acramatic 850sx control panel.
my motor drive is siemens.
SUMP off
DIMP off
GMEM red
DAMP red
RUN yellow
OSA red
MMC red
SERV off
PCA red
DPWR green
APWR green

Display SYSTEM START-UP HOST CONTROL INITIALIZING
then there is no movement. waiting for help for this problem. thank you
Attachment 433459
Attachment 433461