- Problem- Koolmorgen VFS5 questions
-
Registered
Koolmorgen VFS5 questions
Hi Everyone,
I want to run the spindle on a Cincinatti sabre with cmd signal from a battery box on C2-11 and C2-1.
All supply voltages and bus voltages are present. The system and cpu led's are green.
limit & motion & enable are connected to com.
Should the active led be on now?
What am I missing?
Couldn't find a VFS5 installation manual on line but found one for VectorStar, is it similar?
Thanks in advance
Bert
.
Similar Threads:
-
-
Member
Re: Koolmorgen VFS5 questions
Similar yes. Email me for correct manuals. Yes active must be on. Sounds like u r missing ENABLE input.
Sent from my SM-G900V using Tapatalk
- Problem- Koolmorgen VFS5 questions
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules