Cincinnati Talon 208 w/ Acramatic 850 SX


Results 1 to 5 of 5

Thread: Cincinnati Talon 208 w/ Acramatic 850 SX

  1. #1
    Registered
    Join Date
    Mar 2011
    Location
    Venezuela
    Posts
    22
    Downloads
    0
    Uploads
    0

    Default Cincinnati Talon 208 w/ Acramatic 850 SX

    Hello, we have a problem with our spindle. This has the Siemens spindle drive. When try to stop the spindle, the drive will drop out, letting the spindle coast to a stop. We are running at 1000 rpm. According to the operator, this started after there was a fluctuation in voltage in the plant. thanks.

    Similar Threads:


  2. #2
    Registered
    Join Date
    Dec 2006
    Location
    usa
    Posts
    364
    Downloads
    0
    Uploads
    0

    Default Re: Cincinnati Talon 208 w/ Acramatic 850 SX

    It sounds like you have a bad braking resistor or circuit. Try to reduce the spindle speed in 250 rpm increments or less to 0 rpm. What error does the spindle drive have on it?? Send a pic of the spindle drive.

    MIKE http://cncmachinservices.com



  3. #3
    Registered
    Join Date
    Mar 2011
    Location
    Venezuela
    Posts
    22
    Downloads
    0
    Uploads
    0

    Default Re: Cincinnati Talon 208 w/ Acramatic 850 SX

    Thanks for your reply. This is a Siemens spindle drive (SIMODRIVE). We did try your suggestion about stepping down the rpm in increments, but it drops out regardless. e.i. 1000 to 800 rpm drive drops out. We get alrm F42 on the Simodrive, and Alarm # 14068 on the crt. The main problem we have besides the actual fault, is we don't have any manuals for this drive. Thanks.



  4. #4
    Registered
    Join Date
    May 2014
    Location
    USA
    Posts
    16
    Downloads
    0
    Uploads
    0

    Default Re: Cincinnati Talon 208 w/ Acramatic 850 SX

    sounds like I have the same machine, I do have some manuals let me know what you might need and I can take a look.

    dan.evenson@hydratight.com



  5. #5
    Registered
    Join Date
    Nov 2016
    Location
    Peru
    Posts
    3
    Downloads
    0
    Uploads
    0

    Default Re: Cincinnati Talon 208 w/ Acramatic 850 SX

    Hello, after press the cycle start button i get an alarm "Cycle start inhibited". Please help me



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Cincinnati Talon 208 w/ Acramatic 850 SX
Cincinnati Talon 208 w/ Acramatic 850 SX