We have simple Chinese CNC with DSP controller. Because of software re-installation we lost the ZHBUSBconnect program which was used to transfer programs to DSP controller.
We tried search, but couldnt find the link to it.
Please could anyone help to find this program. Thanks.
I read the post about the missing usb controler . I also have a problem I have a new maching it came with the driver but when i try to open it it say the cfg file is missing the dealer does not seem to know what I am saying do I need a new driver or what can you help me please
ps when I try to open the zhbusbconnect it just says cannot find the cfg file
i have a sx-1325e machine and i have a problem with a new "rznc-0501". i connected the usb and installed the "usbcam.inf". the driver ok, but when I try to open "ZHBUSBConnect_E.exe" it shows me a message:
"Can not identify USB communication protocol, please contact dealer and employ latest version!"
then after pressing "OK" i get another message:
"Failed to create empty document"
and it doesnt open the program, what can i do?? Can you send me the attachment too? my email is firstname.lastname@example.org.
CAN YOU HELP ME PLEASE?
Last edited by andiboy; 08-19-2010 at 05:40 AM.
Hi please could you send me images of your PC and yourmachine, i think that i can help you but i need to see it!
best wishes from Chile!
Hi Masters - i have a similar problem like andiboy. After installing the driver, when i try to open zhbusbconnect.exe - there are 2 error messages (same like what Andiboy has mentioned). Is there a solution or a workaround?
Hi emmaarul!! i found the solution, but its a little ununderstanding, coz im using the program in chinnese, i dont know why, but the chinese version goes ok. i found where to download the projects from PC to the machine. if u find the program write me for any question, else i will send the program to you.
Please send me the program - the prog they sent is not working.
could i ask you to post the program on this thread. it will help people like me for ages to come.