help :k1325 router k1325

[dojanahsallam]

hi guys, i have a simple problem can anybody help me

i want to know the required Gcode for router k1325 it's a chines router and that's it's picture

[bellawyl]

hi guys, i have a simple problem can anybody help me

i want to know the required Gcode for router k1325 it's a chines router and that's it's picture

Hi, this is Bella, the pic shows a machine of ours, model K1325. Command code is G code, it's compatible with Type3, ArtCAM, Castmate, Ucan and many other CAD/CAM softwares.
If you have any question, please feel free to contact me.

Skype:bella_wyl
mail address: bella_wyl@126.com

[dojanahsallam]

Hi, this is Bella, the pic shows a machine of ours, model K1325. Command code is G code, it's compatible with Type3, ArtCAM, Castmate, Ucan and many other CAD/CAM softwares.
If you have any question, please feel free to contact me.

Skype:bella_wyl
mail address: bella_wyl@126.com

thanks sir , iam using artcam and you know art cam has many formats for Gcode i wanted to know what is acceptable for this machine , i mean which extension? thanks again

[Taney118]

hi guys, i have a simple problem can anybody help me

i want to know the required Gcode for router k1325 it's a chines router and that's it's picture

pls save as .mmg

[dojanahsallam]

what can i choose top or bottom?

[bellawyl]

what can i choose top or bottom?

Hi Abdullah,
For the first quesiton, you should choose 'model master(*.mmg)' format' for machine K1325, it's related with the control system. for DSP 0501, 'model master(*.mmg)' is correct.

For the second question, the material setup. It shows the menu for choosing the zero reference. Normally we choose the top as the zero reference to engrave. because it will be not accurate if you choose the bottom, you can't see it. and about the top offset, means on which level(height)you will start to engrave. If you set it to '0.0', means it's sure that the surface is very flat, can start engrave from this surface. If you are not sure the surface is flat or not, need to clear some and start from the number greater than '0.0', like '1' or' '2'

[mukivekariya]

Hi im mukesh i nned post for alphacam do u know how can i get it? can you send me m code and g code list?