| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| Chinese Machines Discuss Chinese machine here! |
| | |
| This forum is sponsored by: |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
 
10-14-2011, 04:51 AM
| |||
| |||
Hey folks this is driving me nuts. Im pretty sure there is a fault with the machine but really need some guidance to get there. Machine is new, 8 tool atc linear layout. Im loading the Z tool offset for tool 2 into the tool offset page and tool 2 still keeps going to the same spot. (im not even trying tools 3-8) If im silly and put 200000 into the tool 2 offset it goes to the same spot, if I put 20000, I get the same result and even with the number 2. The physical length difference between tool 1 and tool 2 is 11.6mm (tool 2 is shorter). This is the page with that being reflected (have I missed something)  |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Excitech CNC - Syntec Controller Users | BC-CNC | Chinese Machines | 253 | 01-13-2012 11:42 AM |
| Syntec Controller and Network Access | nash | Chinese Machines | 13 | 04-01-2011 12:24 PM |
| Post processor for Syntec 900 T Controller? | weaston | Post Processor Files | 4 | 03-17-2011 01:06 AM |
| How/Where to change Syntec interface from Chinese to English??" | rvholiv | Excitech routers | 1 | 03-30-2010 01:30 PM |
| Unigraphics NX postprocessor for Syntec 900 Mill controller | kghany | Post Processor Files | 0 | 02-20-2009 11:14 AM |
| | |
Linear Mode
