LinkBack URL
About LinkBacks
What software are you using that you need the post for?
Hi All
I am extremely new to world of CNC. We have just recieved our machine from Quick CNC the machine is set up with a
Syntec controller, Manuel Tool Change with a auto touch off tool sensor. We will be using V carve pro.
In v carve/aspire the installed post processors for syntec are for auto tool change machines, and we are confused how a manual tool change would be specified in the post processor.
We prefer not to have seperate toolpath files for each tool used in a job.
Is there any information on how manual tool changers are done between toolpaths in 1 file?
In lay terms, we would like the machine to run the tool path with the first tool then return home, wait whilst we perform a manual tool change then on the press of a "continue button", the tool sensing will commence and continue with the next tool path in the file.
It appears this may of been done with the "shop bot machine" but not real sure???
Any help would be great
Thanks
Anthony
What software are you using that you need the post for?
Hi
We will be using v carve pro
Thx
Gcode metric curves is the one I'd suggest you start off with...
Based on what I've seen mentioned on here before... (I don't have a syntech controller myself, I currently use EMC)
SYNTEC MANUAL TOOL CHANGE Hi,
Use the the standard output for an automatic tool change. Ex. T0101 It will not interfer with the machining as you will have the tool offsets for each tool in the output. You will need to have an "M05" to stop the spindle after each operation is completed and the clearance for the tool is reached, EX. X1.100 Z.100. If you are using "G96" constant surface speed, put the "M05" as the line following the "G97" line. Then put the "M00" as the line following your home position line, EX. G30 U0W0. The machine will now wait for you to press the auto button. This is when you can safely manualy change tools. You must be careful of course to be using the correct tool for each of the subsequent operations. Note: At the beginning of each tool, The "G97" must be used on the line prior to the "G50" maximum RPM line and the "G96" must follow both of these lines usually just after the tool is in the start cutting position, EX. X1.100 Z.100. I use GibbsCAM and there is a Ganesh 4012 lathe post available. If using a tailstock, remove any "W0" in the program.
%
O1( GANESH POST OUTPUT.NCF )
( FORMAT: SYNTEC 4012 GANESH GT1628 [BA] L3650.85.1.PST )
( 3/31/2012 AT 1:31 PM )
( OUTPUT IN ABSOLUTE INCHES )
( T1 = )
( T2 = )
( T3 = )
( OPERATION 1: ROUGH )
( WORKGROUP )
( TOOL 1: 0.03125 RAD. 80-DEG. DIAMOND )
N1G30U0W0
G54
G0G40T0101
G97S1500M3
G50S1500
G0X2.1Z.1
Z.105
M8
G1X2.F.01
G96S1000
G0X1.9
G1Z-1.3023F.012
G3X1.91Z-1.3312R.0862
G1Z-3.8843
X2.
G0Z.105
X1.8
G1Z-1.2509
G3X1.9Z-1.3023R.0862
G0Z.105
X1.7
G1Z-1.2362
X1.7095Z-1.241
G2X1.7289Z-1.245R.0138
G1X1.7375
G3X1.8Z-1.2509R.0862
G0Z.105
X1.6
G1Z-1.1862
X1.7Z-1.2362
G0Z.105
X1.5
G1Z-1.1362
X1.6Z-1.1862
G0Z.105
X1.4
G1Z-1.0862
X1.5Z-1.1362
G0Z.105
X1.3
G1Z-1.0362
X1.4Z-1.0862
G0Z.105
X1.2
G1Z-.9862
X1.3Z-1.0362
G0Z.105
X1.1
G1Z-.9362
X1.2Z-.9862
G0Z.105
X1.
G1Z-.8862
X1.1Z-.9362
G0Z.105
X.9
G1Z-.8362
X1.Z-.8862
G0Z.105
X.8
G1Z-.7862
X.9Z-.8362
G0Z.105
X.7
G1Z-.5159
G3X.76Z-.5812R.0862
G1Z-.7605
G2X.7681Z-.7703R.0138
G1X.8Z-.7862
G0Z.105
X.6
G1Z-.4952
G3X.7Z-.5159R.0862
G0Z.105
X.5
G1Z-.3023
G3X.51Z-.3313R.0862
G1Z-.4813
G2X.5375Z-.495R.0138
G1X.5875
X.6Z-.4952
G0Z.105
X.4
G1Z-.2509
G3X.5Z-.3023R.0862
G0Z.105
X.3
G1Z-.245
X.3375
G3X.4Z-.2509R.0862
G0Z.105
X.2
G1Z-.0159
G3X.26Z-.0813R.0862
G1Z-.2312
G2X.2875Z-.245R.0138
G1X.3
G0Z.105
X.1
G1Z.0048
G3X.2Z-.0159R.0862
G0Z.105
X.0078
G1Z.005
X.0875
X.1Z.0048
G0X2.1
Z.1
G97S1500
M05
G30U0W0
M0
( OPERATION 2: CONTOUR )
( WORKGROUP )
( TOOL 2: 0.03125 RAD. 80-DEG. DIAMOND )
N2G30U0W0
G54
G0G40T0202
G97S1500M3
G50S1500
G0X2.1Z.1
Z.075
M8
X0.
G1X-.1125F.01
G96S500
Z.025
G2X-.0625Z0.R.025
G1X.0875F.005
G3X.25Z-.0812R.0813
G1Z-.2313
G2X.2875Z-.25R.0188
G1X.3375
G3X.5Z-.3313R.0813
G1Z-.4813
G2X.5375Z-.5R.0188
G1X.5875
G3X.75Z-.5812R.0813
G1Z-.7605
G2X.761Z-.7738R.0188
G1X1.7024Z-1.2445
G2X1.7289Z-1.25R.0188
G1X1.7375
G3X1.9Z-1.3312R.0813
G1Z-3.8659
G2X1.95Z-3.8909R.025
G1X2.05
G0X2.1
Z.1
G97S909
M05
G30U0W0
M0
( OPERATION 3: THREAD )
( WORKGROUP )
( TOOL 3: 0 RAD. THREADING - GROOVE STYLE )
N3G30U0W0
G54
G0G40T0303
G97S1000M3
G0X2.1361Z.1718
Z.1
M8
X.3861
G1X.35F.0769
G0X.4256
G32Z-.2F.0769
G0X.35
Z.1
X.4056
G32Z-.2F.0769
G0X2.1361
Z.1718
M9
M05
G30U0W0
M30
%
( FILE LENGTH - 2319 CHARACTERS )
( FILE LENGTH - 19.62 FEET )
( FILE LENGTH - 6.06 METERS )
Posting Permissions
