try this one
hi, I 'm new to this Site, I'm very Happy to find it, cause I have used alot of information here to solve my new K45/MT1325 Woodworking CnC Router
with a DSP Controller !
I have encountered a problem and that is My controller's inner file seems to be gone ! ( it seeme that the K45/mt1325 configuration has been formated form the DSP ). I mean it has returned to its default setting, the table size and te XYZ limits is not right, and the axis moves verly slowly and also inaccurate !!
I'm wondering if anybody could help me out with this !
try this one
Website: [url]www.quick-cnc.com[/url] Email: [email]firstname.lastname@example.org[/email] MSN/Hotmail: [email]email@example.com[/email] Skype:taney118
Hi Taney ,
thanks for your information, I'm going to set these parameteres and will post the result!
But I have tested nearly the same parameters and getting no result cause I have two of these machines , one working properly and one is broken. do you think there is anyway that I can copy one's file to the other ?
Hi again taney
I have tried those parameters, but it still doesn;t seem to work like the other machine !!!!
Do you think there is any other way ???
i'm going to contact you through e-mail, I need some Inquiry form you company !