Originally Posted by
HobbyCAD
Tomica,
Looking at the pictures from the German CNC-Technical site, those are genuine Chinese machines. The pictures of the K-series machine, the oiler, the manifold, the tools, the clamps, the little box with carving bits, even the plastic container they present it in, EXACTLY the same as I got with my machine from Jinan J-Cut.
As you have read, I am EXTREMELY unhappy with my J-CUT machine. I have a lot of Chinese equipment in my workshop, Sieg Lathe and Mill, Allweld AC/DC Inverter Welder, Plasma Cutter, Metal Cold Bandsaw, Drill Press, all are good machines. But this J-CUT machine, it's no-good.
In defense of others, I've seen other Chinese manufacturers CNC machines, they are a 100% better than the machine I got. I'm still of the opinion there was some type of scam, the factory workers built my machine on the sideline, and pocketed the money themselves. It's finished really rough !!
So be carefull where you buy from. Good reports from Jinan Quick, bad reports from Jinan J-Cut
If it looks like dogpoo, if it feels like dogpoo, if it smells like dogpoo, IT's DOGPOO !!