Jinan Quick CNC Router Purchases


Page 1 of 51 123411 ... LastLast
Results 1 to 12 of 607

Thread: Jinan Quick CNC Router Purchases

  1. #1
    Registered
    Join Date
    Dec 2006
    Location
    australia
    Posts
    878
    Downloads
    0
    Uploads
    0

    Thumbs up Jinan Quick CNC Router Purchases

    Our current 1500 x 3000 ( 5x10 ) CNC Router has been in use for the last year and a half. It is an excellent machine. The workload in our family business continues to increase and we are using the CNC Router more and more every month. We rely so much on the machine that should it break down - it would cause big problems with our workflow. Therefore it was decided to buy a second machine to assist with the work output, and also as insurance against any breakdown.

    I conducted some research via Alibaba.com and also Tradekey to find out just which brands of machine were available from China, and then requested some quotations. The search ended after we received the quotes from Jinan Quick CNC Router co,ltd. Their prices were very competitive, and the service first rate. The machines also have several features that i found impressive. In particular - the lubrication system that i will post about later.

    We also decided to buy a second machine -1200 x 2400 ( 4x8 ) for my own use as we do not want to use the production machines for anything other than making our wardrobe doors. Then after some negotiations, we also bought a smaller machine 600mm x 1000mm for another project.

    Here are some photos of the actual machines, which were taken just before they were crated up for the trip to Australia -

    Continued in next post

    Rocket.

    Similar Threads:
    Attached Thumbnails Attached Thumbnails Jinan Quick CNC Router Purchases-k1325-jpg   Jinan Quick CNC Router Purchases-k1224jpgthenewmachine-jpg   Jinan Quick CNC Router Purchases-k6100-jpg  


  2. #2
    Registered
    Join Date
    Dec 2006
    Location
    australia
    Posts
    878
    Downloads
    0
    Uploads
    0

    Default

    Before anybody asks why we did not just buy the same brand of machine as our current one, let me say there is no reason. Just like i drive a Holden this year - next year i might change to a Ford.

    The machines are due to arrive within a couple of weeks. I will post full reviews of each machine after we begin to use them.

    The specifications of the 1500 x 3000 CNC Router -

    Spindle 4.5 KW HSD ( manual tool change )
    Rack and Pinion Transmission
    Stepper Motors
    Max Speed 35,000mm/Min
    Max Cutting Speed 25,000mm/Min
    DSP Control System
    Vacuum Table
    Chinese Watercooled Vacuum Pump
    Oil Lubrication System
    Z Zero Sensor.

    The Oil Lubrication system really makes sense. Any problems with our current machine have been down to lack of lubrication by the operator. The MDF dust gathers on the rails and gets trapped in the blocks that travel on the rails, thus causing the gantry to shudder. The lubrication System should help to prevent this.

    The Z Zero Sensor is located on the front of the machine away from the Spindle. I am told that it actually works.

    The Watercooled Vacuum Pump is about a third of the price of the Becker
    And i am told it sucks extremely well.

    Next post - 1200 x 2400 machine

    Rocket.

    Some more pics -

    Attached Thumbnails Attached Thumbnails Jinan Quick CNC Router Purchases-lubricationsystem-jpg   Jinan Quick CNC Router Purchases-lubricationsystem-2-jpg   Jinan Quick CNC Router Purchases-lubricationsystem-1-jpg   Jinan Quick CNC Router Purchases-watercoolingvacuumpump-2-jpg  

    Jinan Quick CNC Router Purchases-watercoolingvacuumpump-4-jpg   Jinan Quick CNC Router Purchases-t-slotvacuumtable-2-jpg   Jinan Quick CNC Router Purchases-rackandpinionlinearguide-1-jpg   Jinan Quick CNC Router Purchases-k1325-jpg  



  3. #3
    Registered
    Join Date
    May 2004
    Location
    Australia
    Posts
    600
    Downloads
    0
    Uploads
    0

    Default

    hey Rocket, seeing as you were buying 3 machines in one hit you should have gone on a "fact finding mission" to China prior to handing over the folding stuff. 100% tax deductible in fact. Not that I doubt the quality of the machines, I'm sure they'll be fine. Anyway, I hope all goes well and thanks for sharing. In fact you still can go, on a "training course".



  4. #4
    Community Moderator ger21's Avatar
    Join Date
    Mar 2003
    Location
    United States
    Posts
    30700
    Downloads
    0
    Uploads
    0

    Default

    Where's the Auto Tool Changer???

    Gerry

    UCCNC 2017 Screenset
    http://www.thecncwoodworker.com/2017.html

    Mach3 2010 Screenset
    http://www.thecncwoodworker.com/2010.html

    JointCAM - CNC Dovetails & Box Joints
    http://www.g-forcecnc.com/jointcam.html

    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)


  5. #5
    Registered
    Join Date
    Dec 2006
    Location
    australia
    Posts
    878
    Downloads
    0
    Uploads
    0

    Default

    Quote Originally Posted by ger21 View Post
    Where's the Auto Tool Changer???
    Hi Gerry, Now why did i know you would ask that?

    I am still operating under the " Kiss " principle.

    Next one will have the tool changer.


    Rocket.

    Last edited by rocket67; 08-01-2009 at 08:55 PM. Reason: Spelling


  6. #6
    Registered
    Join Date
    Dec 2006
    Location
    australia
    Posts
    878
    Downloads
    0
    Uploads
    0

    Default

    Quote Originally Posted by skippy View Post
    hey Rocket, seeing as you were buying 3 machines in one hit you should have gone on a "fact finding mission" to China prior to handing over the folding stuff. 100% tax deductible in fact. Not that I doubt the quality of the machines, I'm sure they'll be fine. Anyway, I hope all goes well and thanks for sharing. In fact you still can go, on a "training course".
    Hi Skip, I certainly need the training course!

    We will go to China at some stage - but our family business is very demanding of our time. ( Good Excuse? ). Worried about Swine Flu at the moment. Maybe next year.

    Rocket.



  7. #7
    Community Moderator ger21's Avatar
    Join Date
    Mar 2003
    Location
    United States
    Posts
    30700
    Downloads
    0
    Uploads
    0

    Default

    Are you going to get another building to put them all in?

    Gerry

    UCCNC 2017 Screenset
    http://www.thecncwoodworker.com/2017.html

    Mach3 2010 Screenset
    http://www.thecncwoodworker.com/2010.html

    JointCAM - CNC Dovetails & Box Joints
    http://www.g-forcecnc.com/jointcam.html

    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)


  8. #8
    Registered
    Join Date
    Dec 2006
    Location
    australia
    Posts
    878
    Downloads
    0
    Uploads
    0

    Talking 1200 x 2400 machine. Eureka!

    This is the one i have been waiting for. My very own CNC Router!



    All this time that we have had our current machine - i have resisted the temptation to test my skills on it - for fear of breaking it, and causing downtime within our business.

    Now i can get into it bigtime! There are going to be Ford Mustang signs everywhere. My wife wants some new kitchen cupboards, etc etc.

    Specifications -
    3KW Water Cooled Spindle
    Rack and Pinion Transmission
    Max Speed 35,000mm/Min
    Max Cutting Speed 25,000mm/Min
    DSP Control System
    T Slot Table
    Z Zero Tool Sensor
    Lubrication System

    I see from the photo that the first job i need to do on it is to secure the DSP Cable.
    Not sure whether this machine will live in my garage or at work. Wherever i can spend the most time with it i guess.

    Rocket.

    Attached Thumbnails Attached Thumbnails Jinan Quick CNC Router Purchases-k1224jpgthenewmachine-jpg   Jinan Quick CNC Router Purchases-t-shapedaluminum-jpg   Jinan Quick CNC Router Purchases-dusthoodk1224-jpg   Jinan Quick CNC Router Purchases-chinese45kwwatercoolingspindle-jpg  

    Last edited by rocket67; 08-01-2009 at 08:57 PM. Reason: Additional info


  9. #9
    Registered
    Join Date
    Dec 2006
    Location
    australia
    Posts
    878
    Downloads
    0
    Uploads
    0

    Default Already working on it!

    Quote Originally Posted by ger21 View Post
    Are you going to get another building to put them all in?
    Only 3 more cars left to restore - then we will have plenty of room.

    Rocket.



  10. #10
    Registered
    Join Date
    Dec 2006
    Location
    australia
    Posts
    878
    Downloads
    0
    Uploads
    0

    Default The 600 x 1000 machine. A little gem!

    This machine intrigues me. A small machine that is built like a tank!



    I have noticed that there are many buyers for these little machines. They are mostly built at 600mm x 900mm. The extra 100mm is probably a good thing.

    Specifications -

    1.5KW Watercooled Spindle
    Stepper Motors
    Max Speed 10,000mm/Min
    Max Cutting Speed 6,000mm/Min
    DSP Control System
    Z Zero Tool Sensor.

    We will have lots of fun with this little machine.

    Rocket.



  11. #11
    Registered
    Join Date
    Dec 2006
    Location
    australia
    Posts
    878
    Downloads
    0
    Uploads
    0

    Thumbs up !300 x2500 Auto Tool Changer machine

    For those who prefer the Auto Tool Changer - The K1325AT/F0808 -



    This machine has an 8 piece Carousel type Auto Tool Changer

    Specifications -
    Working Area 1300mm x 2550mm x 300mm
    Spindle 8KW Air Cooled
    Rack and Pinion Transmission
    Yaskawa Servo Motors
    Max Speed 60,000mm/Min
    Max Cutting Speed 30,000mm/Min
    LNC Control System
    T Slot Vacuum Table
    230CBM Vacuum Pump
    Lubrication System
    Dust extractor

    A serious machine. We have not purchased this machine - just wanted to show you the machine.

    Rocket.

    Some pics -

    Attached Thumbnails Attached Thumbnails Jinan Quick CNC Router Purchases-k1325atf0808-1-jpg   Jinan Quick CNC Router Purchases-vacuumpipes-jpg   Jinan Quick CNC Router Purchases-vacuumvalves-jpg   Jinan Quick CNC Router Purchases-8kwhsdandtoolmagazine-3-jpg  

    Jinan Quick CNC Router Purchases-8kwhsdandtoolmagazine-jpg   Jinan Quick CNC Router Purchases-electronicalcabinetk60vacuumbuttons-jpg  


  12. #12
    Registered
    Join Date
    Dec 2006
    Location
    australia
    Posts
    878
    Downloads
    0
    Uploads
    0

    Talking 4th Axis Rotary Head

    Have some more photos to add, showing the 4th axis Rotary head.

    Forgot to put up the Website details for Jinan Quick CNC Router Co.,ltd in case anybody wants a quotation for a machine

    Here it is http://www.kk-cnc.com The person to contact is Rick rickcarter@live.cn

    Just click on the " English " button when visiting the Website.

    In the interests of disclosure - we are intending to become Australian Sales Agents for this range of CNC Routers - so if i appear to be pushing them - I AM!!!!

    Rocket.

    Attached Thumbnails Attached Thumbnails Jinan Quick CNC Router Purchases-throtary1-jpg   Jinan Quick CNC Router Purchases-throtary-jpg   Jinan Quick CNC Router Purchases-thwatercoolingspindle-jpg  
    Last edited by rocket67; 08-03-2009 at 02:49 AM. Reason: More info


Page 1 of 51 123411 ... LastLast

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Jinan Quick CNC Router Purchases
Jinan Quick CNC Router Purchases