T0000 tool change macro. I think this may need tweaked to us in inch mode.
I have attached my tool change macro. Syntec 6MA. This works great in metric mode, but when changing to inch mode, I must insert code in the program to change the machine to metric mode immediately before the tool change and back to inch mode immediately after the tool change. I renamed the file with a .txt extension so that I could upload it to this site. I would like to modify this macro so that I don't have to modify my program, and also so that the tool change works at 100% rapid mode. Currently, the tool change runs at 50% rapids which slows things down quite a bit.