Syntec software limit exceeded

[Bascil]

Hi
I am running first simple program, 2 circles 2 different tools. Tools measured..
I get 2 alarms:
Motion 18 Zaxis first negative software limit exceeded
Coordinate 40 the 1ncprogramL8 exceed software limit or hardware limit.

Please help

Sent from my SM-G920F using Tapatalk

Similar Threads:

• Need Help!- Torq Cut - Following Error Limit Exceeded
• Help Please! MSG PM Following Error Limit Exceeded?
• Newbie- The A axis maximum limit has been exceeded
• Need Help!- Desk Top Resources exceeded
• Need Help!- Following error Limit Exceeded

[Kev Brook]

Sound like the machine is going to run out of travel, how big are the circles, and how big is your machine bed. you could try resetting again. It's the Z that's more worrying though.Can you give a bit more info may be post the program

[Bascil]

Sound like the machine is going to run out of travel, how big are the circles, and how big is your machine bed. you could try resetting again. It's the Z that's more worrying though.Can you give a bit more info may be post the program

Yes its an issue with z levels..
I need to get hold of z levels understanding and retry

Thanks

Sent from my SM-G920F using Tapatalk

[Bascil]

Yes its an issue with z levels..
I need to get hold of z levels understanding and retry

Thanks

Sent from my SM-G920F using Tapatalk

Managed.. set levels correctly in machine and vcarve..
Thanks

Sent from my SM-G920F using Tapatalk

[feedr8cnc]

Hi Bascil,

Have you resolved your problem?

[Bascil]

Hi Bascil,

Have you resolved your problem?

Yes.. correct g45 and z levels in vcarve..

Sent from my SM-G920F using Tapatalk