How to network a Syntec controller

[BM3]

Turn the wireless off.

Only worry about the dlink switch for now

Take the switch and place it near the pc and connect it to power. Take the ethernet cable that was originally in the pc (that runs to the cnc) and connect it into the switch. Take the 2meter ethernet cable you have just bought and connect to into the switch, with the other end connect it into the pc.

[makimaki]

Ok, done. The syntec still says it's looking in an old directory when I try and load a file.

[makimaki]

2 separate screens showing old directory and no network connection. Left is file manager and right hand side is assign main program window.

https://www.dropbox.com/s/3iyn3yl0x5...%20pm.png?dl=0

[BM3]

sent you a PM