Build Thread PROBE- USB MOTION CONTROLLER CARD


Results 1 to 9 of 9

Thread: PROBE- USB MOTION CONTROLLER CARD

  1. #1
    Registered
    Join Date
    Aug 2017
    Location
    Italy
    Posts
    5
    Downloads
    0
    Uploads
    0

    Default PROBE- USB MOTION CONTROLLER CARD

    Hi everybody,
    do you know this breakout card
    I built a probe ... but I do not
    clear how to physically connect it internally
    to the USB controller. I did a lot of research without
    find the solution. I cannot find the installation manual.
    This is the image of
    card that I find into the Controller PRT-E750.
    Many thanks in advance
    Walterius

    motion controller card 4 axis
    model bitsensor BSMCI14C

    Similar Threads:
    Attached Thumbnails Attached Thumbnails PROBE- USB MOTION CONTROLLER CARD-motion-controller-card-jpg  


  2. #2
    Member
    Join Date
    Apr 2013
    Location
    Sweden
    Posts
    1899
    Downloads
    2
    Uploads
    0

    Default Re: PROBE- USB MOTION CONTROLLER CARD

    Sorry, I have never seen this and can't even find it on eBay. Did you try to contact the seller?

    https://www.youtube.com/c/AdaptingCamera/videos
    https://adapting-camera.blogspot.com


  3. #3
    Member
    Join Date
    Jun 2010
    Location
    Australia
    Posts
    4252
    Downloads
    4
    Uploads
    0

    Default Re: PROBE- USB MOTION CONTROLLER CARD

    Just a word of warning: many Chinese controllers cannot handle a probe input. This drives people crazy.
    I have no idea whether yours can or cannot.

    Cheers
    Roger



  4. #4
    Registered
    Join Date
    Aug 2017
    Location
    Italy
    Posts
    5
    Downloads
    0
    Uploads
    0

    Default Re: PROBE- USB MOTION CONTROLLER CARD

    thanks..
    can be a big problem!



  5. #5
    Registered
    Join Date
    Aug 2017
    Location
    Italy
    Posts
    5
    Downloads
    0
    Uploads
    0

    Default Re: PROBE- USB MOTION CONTROLLER CARD

    yes, that's the first thing I tried, but no answer.
    I just have to hope someone can tell me a track
    to follow to understand the details of this card ...



  6. #6
    Member ger21's Avatar
    Join Date
    Mar 2003
    Location
    Shelby Township
    Posts
    35538
    Downloads
    1
    Uploads
    0

    Default Re: PROBE- USB MOTION CONTROLLER CARD

    Is this a Mach3 card?

    Gerry

    UCCNC 2017 Screenset
    [URL]http://www.thecncwoodworker.com/2017.html[/URL]

    Mach3 2010 Screenset
    [URL]http://www.thecncwoodworker.com/2010.html[/URL]

    JointCAM - CNC Dovetails & Box Joints
    [URL]http://www.g-forcecnc.com/jointcam.html[/URL]

    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)


  7. #7
    Registered
    Join Date
    Aug 2017
    Location
    Italy
    Posts
    5
    Downloads
    0
    Uploads
    0

    Default

    Quote Originally Posted by ger21 View Post
    Is this a Mach3 card?
    Yes Sir...it's a Mach 3 card and it works wery well!



  8. #8
    Member
    Join Date
    Dec 2010
    Location
    Australia
    Posts
    92
    Downloads
    0
    Uploads
    0

    Default Re: PROBE- USB MOTION CONTROLLER CARD

    Hi Walterius, just came across your post, a couple of years old, I have the red card (basically the same as yours) and have some manuals BUT they are in chinese in .pdf.
    I had started to translate some of them but lost them due to a crash. The text in a pdf can be copied and pasted into Google translate, the English can then be repasted back into the pdf replacing the Chinese.
    If you do not have the manuals, yet, and are willing to go through this laborious process, I can send you the pdf's or I can post them here.
    I would assume you inserted the .dll file to tell Mach3 that there is a usb card attached, mine is way better than the printer port card.
    Regards
    Eric



  9. #9

    Default Re: PROBE- USB MOTION CONTROLLER CARD

    Quote Originally Posted by WALTERIUS View Post
    Hi everybody,
    do you know this breakout card
    I built a probe ... but I do not
    clear how to physically connect it internally
    to the USB controller. I did a lot of research without
    find the solution. I cannot find the installation manual.
    This is the image of
    card that I find into the Controller PRT-E750.
    Many thanks in advance
    Walterius

    motion controller card 4 axis
    model bitsensor BSMCI14C
    Hi Walterious

    Have you able to setup the breakout card? I have bought same one and trying to setup, It's done to me

    I do not know how to setup it in mach 3, to control my VDF via the board

    I found manual but in Chinese language, it not easy to understand with google translation

    Any one have been used this, please advise

    Thanks
    Huan



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

PROBE- USB MOTION CONTROLLER CARD

PROBE- USB MOTION CONTROLLER CARD