My guess is that the machine came with a pirated version of the Planet CNC board, which is what's causing the issue.
Hi guys,
Purchased a Chinese CNC 6040 machine and am having trouble with activating the licence. The serial number keeps changing and the activation code I have does not work as the serial number is wrong. Is there anything that can be done about this? The machine was fine fopr a few days and now the software is in evaluation mode so I am stuck with a machine which won't function for any more than 25 lines of G code.
Can somebody advise please?
Regards,
Raj
Similar Threads:
My guess is that the machine came with a pirated version of the Planet CNC board, which is what's causing the issue.
Gerry
UCCNC 2017 Screenset
[URL]http://www.thecncwoodworker.com/2017.html[/URL]
Mach3 2010 Screenset
[URL]http://www.thecncwoodworker.com/2010.html[/URL]
JointCAM - CNC Dovetails & Box Joints
[URL]http://www.g-forcecnc.com/jointcam.html[/URL]
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
same here my activation key and serial number changed
with my interaction with planet-cnc i was told that the board i have is a "fake"
I purchase i license from planet-cnc for 69 euro last week and i was able to activate and register my "fake" controller.
now i'm trying to use it but my desktop freezes!
i tried my laptop with larger graphics card and the freezing was corrrected so far
still learning and a newbie
please share how thing went on your controller since your post date.