3040 having issues in one axis...


Results 1 to 1 of 1

Thread: 3040 having issues in one axis...

  1. #1
    Registered
    Join Date
    Apr 2014
    Posts
    0
    Downloads
    0
    Uploads
    0

    Default 3040 having issues in one axis...

    So my 3040 has been running for years and worked great. The machine is far from original spec, it has a water cooled 24K motor and upgraded stepper motors along with a Gecko 540 controller now running it.

    It has however started to mess with my lettering. I am getting O's that are all messed up and F's that have long strokes etc.

    Picture attached to explain better.... If you look close its almost like the machine comes back around to a different spot.



    I have checked all the calibration and gone through every bolt and part on the machine to see if there is play that shouldnt be there...



    Similar Threads:
    Attached Thumbnails Attached Thumbnails 3040 having issues in one axis...-2017-06-08-17-18-35-jpg   3040 having issues in one axis...-2017-06-08-17-14-44-jpg  


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

3040 having issues in one axis...

3040 having issues in one axis...