Folks, I am still on the hunt for a good machine. Routed products will be 3-5mm plastics and some wood templating jobs.
I started going down the diy route but quickly figured out it's not
Much cheaper and a lot more labor to build rather than starting with a working machine.
Does anyone have one of these or can tell me what you think about this machine. I am looking at this with a few add on's, flood table, vacuumed table which can be configured to the machine.

http://salecnc.com/catalog/m/prod_detail.php?cPath=21&products_id=210

http://salecnc.com/catalog/m/prod_detail.php?cPath=21&products_id=97

What say you?
And thanks for any input!

Similar Threads: