Newbie OmioCNC report


Page 1 of 111 1234 11 51 101 ... LastLast
Results 1 to 12 of 1331

Thread: OmioCNC report

  1. #1
    Registered dharmic's Avatar
    Join Date
    May 2015
    Location
    Australia
    Posts
    948
    Downloads
    0
    Uploads
    0

    Default OmioCNC report

    I joined the forum recently, looking for information on a "next step". I've had a SIEG manual lathe and mill for years and use them for the occasional hobby project. A year or so ago I bought a SeeMeCNC Rostock Max 3D printer and have been having fun with that but, particularly for dive equipment, prints just won't hold a seal or pressure without some form of post processing.

    Still. In that process I've learned to enjoy going straight from a CAD model to production (obviously with a few steps along the way) and the manual gear has lost its shine.

    So time for a mill - eventually I'd love a 5 axis machine plus the software and skill to drive it, to replace the lathe and mill both. But that ain't going to happen for a long time yet. I had a look at a mate's KX3-servo SIEG but it just didn't have the throat depth for a couple of projects I want to try.

    Limited by shipping costs and availability in Australia, eventually it boiled down to three choices.
    - A larger version of the X3 mill, replacing the leadscrews with ballscrews, steppers/servos etc;
    - A bigger knee mill with a similar retrofit;
    - A gantry type machine.

    Problem with the first two is that I intend doing a lot of small/fine stuff so I want a much smaller tool and high speed spindle - problematic with these guys. Plus I want to get started on using the thing first time around, not spend months trying to get the tool working.

    Still, lots of reading and learning about frame types and rigidity and appropriate choice of ways etc has helped here.

    Yesterday I dropped the hammer on an OmioCNC (formerly carving-cnc) X6-2200L-USB with the 4th axis. X6-2200L (4-axis) Woodworking / Metalworking CNC Router --OMIOCNC(Carving-CNC) -omiocnc.com

    This one caught my attention due to the large motors, the use of 20mm Hiwin rails instead of the more common round unsupported ones, the USB controller which apparently actually works out of the box. I figure that the low Z height can be taken care of with a higher gantry with wider spaced "feet" to account for the extra leverage and I'd only need to replace the rails and leadscrew on the Z to get better travel. But we'll see.

    If nothing else it was a cheap way to get me into the game and give me the tools to build something better if I need it. We shall see!

    Supposedly be here in a couple of weeks, I shall report on the inevitable DHL wallet rampage and unpacking etc as we go.

    Oh, and a pic. Coz everyone likes pics.



    Similar Threads:


  2. #2
    Registered dharmic's Avatar
    Join Date
    May 2015
    Location
    Australia
    Posts
    948
    Downloads
    0
    Uploads
    0

    Default Re: OmioCNC report

    Well, only two weeks but it felt like forever.

    I thought I'd use the waiting time to clean the shed up a bit but got dragged interstate for work instead. The idea of leaving it in the boxes until the shed was clean lasted until about ten seconds after I got the boxes on the trolley at home today.

    Shipping was relatively painless apart from a couple of days of DHL dicking me around because they couldn't work out whether they did or didn't have my mobile number. I did get hit for GST and another AUD80 in customs handling fees at this end, total of about AUD270 on top which didn't bother me at all.

    Unboxed and assembled in about 25 minutes. A few nice things after reading a lot of horror stories on the 3020 etc machines...
    - Well packed, one small ding in the bed right at the back that I don't care about.
    - The threads were clean, correctly sized etc. Only one bolt was a little tight, everything else just slid home.
    - Cable chain didn't seem tight at all.
    - Controller box came with an Australian power plug - now I'm impressed!
    - All the assembly points had marks on them indicating this thing had already been assembled in the shop before being broken down for shipping. This makes me happy: they've not just thrown a bunch of bits in a box and sent it, they've made a unit then prepped it for shipping.

    I haven't fired it up yet, need to go through their config instructions and files on a laptop to get it ready to go. Fortunately it's USB so I don't need to hunt down extra cards and crap, I just dig my old lappy out of the cupboard and get rolling. Weekend job.

    Photo looks remarkably similar to their advertising pages which also makes me feel a little warm and fuzzy inside.

    Attached Thumbnails Attached Thumbnails OmioCNC report-img_20150716171824-jpg  


  3. #3
    Gold Member
    Join Date
    Dec 2007
    Location
    Australia
    Posts
    2092
    Downloads
    1
    Uploads
    0

    Default Re: OmioCNC report

    The extra fees are a shame, why didn't they mark the packages as "$40 worth of second-hand farm tools" like they normally do! ;-)

    Good looking machine, I was very happy with my 6040, and the spindle is great, you'll love it over using a router.

    Happy machining!

    cheers, Ian

    It's rumoured that everytime someone buys a TB6560 based board, an engineer cries!


  4. #4
    Registered dharmic's Avatar
    Join Date
    May 2015
    Location
    Australia
    Posts
    948
    Downloads
    0
    Uploads
    0

    Default Re: OmioCNC report

    They did knock it down but the Aussie Peso is so ****e at the moment that just the shipping nearly took it over the threshold. And I've had that much come through without being hit I don't mind copping this one on the chin.



  5. #5
    Registered dharmic's Avatar
    Join Date
    May 2015
    Location
    Australia
    Posts
    948
    Downloads
    0
    Uploads
    0

    Default Re: OmioCNC report

    Quick update. Couldn't get it going yesterday but tried again today with a new install of Mach3 and hey hey, it's all running.

    A little bit of a mismatch between their tool setter documentation and the on-screen settings available in Mach3 but nothing a little mental arithmetic can't sort out.

    Only testing with a fibreboard floating floor offcut at the moment but 3000mm/min feedrate seems perfectly fine with a 0.5mm depth of cut.

    Still need to see how it goes with aluminium, and plug in the 4th axis for a bit of a play.

    But so far, so good. I'm quite impressed with how this is going.

    Attached Thumbnails Attached Thumbnails OmioCNC report-img_20150718135645-jpg  


  6. #6
    Registered dharmic's Avatar
    Join Date
    May 2015
    Location
    Australia
    Posts
    948
    Downloads
    0
    Uploads
    0

    Default Re: OmioCNC report

    Happy days. Plenty of tuning required but I'm very happy with how easily this thing munches aluminium!





  7. #7
    Registered
    Join Date
    Apr 2013
    Location
    Australia
    Posts
    3
    Downloads
    0
    Uploads
    0

    Default Re: OmioCNC report

    Hey Mate, I too have the X6-2000L, got it delivered about 2 weeks or so ago. All i can say is that i am so disappointed with it at this moment. It looks like you were lucky with your one...or i was just super unlucky. As there any chance you can measure the runout of your spindle for me? Both with an endmill in a collet and the inside bore of the spindle itself without the nut and collet. I just switched my spindle on and it is vibrating and rattling like crazy and the bottom where the collet goes, nut and shaft is all getting warm to the touch (5 min of running not actually cutting anything) and I have the water cooling connected and running.



  8. #8
    Registered dharmic's Avatar
    Join Date
    May 2015
    Location
    Australia
    Posts
    948
    Downloads
    0
    Uploads
    0

    Default Re: OmioCNC report

    Next time I'm down the shed I'll have a look.

    But I haven't checked because I never felt the need to. When mine's up and running I have to look closely to even see that it's running - there's zero discernable wobble and zero vibration unloaded. The spindle/collet hadn't warmed up and water was coming out cold after cutting the part in the video above.

    With a sample population of two I don't know whether I got lucky or you got unlucky. Have you sent an email back to Grace? She was very helpful with a couple of minor shipping and build questions I had, very fast response.



  9. #9
    Registered
    Join Date
    Apr 2013
    Location
    Australia
    Posts
    3
    Downloads
    0
    Uploads
    0

    Default Re: OmioCNC report

    No i havent spoken to her about this issue yet, but the others yes. I will email tomorrow and see what they say, if its anything like the other issues i have had, it will be nothing but a challenge to get anything useful from them



  10. #10
    Registered dharmic's Avatar
    Join Date
    May 2015
    Location
    Australia
    Posts
    948
    Downloads
    0
    Uploads
    0

    Default Re: OmioCNC report

    Damn. I'm sorry to hear that. I've been lucky enough that my queries so far have only been looking for info, not for replacements for crap parts. Good luck - don't be afraid to sing out if they drop the ball, warn others etc.



  11. #11
    Registered
    Join Date
    Apr 2013
    Location
    Australia
    Posts
    3
    Downloads
    0
    Uploads
    0

    Default Re: OmioCNC report

    Yep as soon as i get everything sorted ill update with the issues i have had.



  12. #12
    Registered dharmic's Avatar
    Join Date
    May 2015
    Location
    Australia
    Posts
    948
    Downloads
    0
    Uploads
    0

    Default Re: OmioCNC report

    Today's little game was to build a new pressurestat tube bolt for my La Pavoni coffee machine. Basically a hex bolt, 17mm across the flats, 3/8 x 28tpi thread with a hole through the guts into which the copper tube is silver soldered. Yeah, so brass it is.

    Well, I managed to play manual G-code driving and happily did the indexing and flat milling on the hex head. Almost.

    Anyone looking at the 4th axis option please bear in mind this thing is made of cheese. Brass, 6mm HSS cutter, running about 5000RPM. 3mm stepover. About a 1.5m/min feed rate. 0.25mm depth of cut was ok, a little rough. 0.5mm depth of cut jogged the 4th axis stepper a tooth. Lol.

    Dry runs of the thread cut with a 60║ V bit looked promising, but muggins here managed to snap the only 60║ bit I had jogging the thing around trying to find a zero. Which is ok, because I then put it on the lathe and managed to snap my thread cutter on that, too <grr>. I could have re-ground that one but decided that the universe was telling me something. Like it was time to just buy a new nut, get the coffee machine fixed and have a brew.



Page 1 of 111 1234 11 51 101 ... LastLast

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

OmioCNC report
OmioCNC report