Hi All,
Once we get there to the axe and removed the belt from the end of it we realised that the axe moves so easy, like is in the air, so we had some doubt that something same should be on the other bottom end too, so we have continued t disassemble.
Releasing the nut screws we relised that even we asked and payed extra for original Taiwan made TBI Motion nut and screw they assembled the machine with fake parts.
When we get to the bottom, we saw the big surprise. As the belt driving pulled the axe sideaway the axe at the bottom bearing brokens.
As all bearings at the axe ends were just the very low end chines ones, we bought already the replacement parts and the locking (Seager) ring too.
Now we are looking for new screw. As its fake we have to buy a new nut too, too to keep compatibility.
So again we have to invest quite huge into this machine ! So now I definitely dont recommend to anyone to buy from this company !
Will keep updated.