RhinoCAM Post Processor for DSP RZNC0501

[sos13]

Hello,
Anyone here using Rhinocam with this dsp controller?

Which post processor did you select in the software?

Or can anyone give me some guidance on creating/setting up the post processor in Rhinocam?

I was using VcarvePro but am trying to learn Rhinocam so I can use my rotary device.

In VCarve the cnc worked great using the G code mm *.tap post processor but Mecsoft doesn't seem to have a pp like this. They have tried to setup a new pp for this dsp but it isn't working quite right.

Thanks
Vicki

Similar Threads:

• RhinoCAM & DSP RZNC0501
• Post for RhinoCAm
• rhinocam post processor for mach3 for 5axis
• Rhinocam post processor
• Rhinocam Shopbot post processor question

[superkent]

I'm interested in that too. Anyone know?

Thanks,
Kent

[sos13]

Hi Kent,
Never could get anything out of MecSoft - moved to BobCAD instead.

They are working with us - writing a pp for this dsp.

I'll keep you posted if interested.

Vicki

[superkent]

Hi Vicki,
Thank you for your answer.
It will be great if you keep posting news on this, I would be very grateful.

Thanks,
Kent

[mahia2005]

Hello,
Can you help me by sending the G-Code post set file for my CNC 3 axis using RZNC 0501 DSP.
This because I have loste ucancam dongle and can't open anymore the software.
Also, I want to change the CAD CAM software but did'nt decide yet.
thanks for your help.
Regards
mahia2005

[superkent]

Hello everyone.
i've made some experiment on this DSP and actually i know that:
- It can read Feed from program - es. F2100 (changing a setting on the dsp)
- It can understand Linear (G0 and G1) and circular (G2 and G3 with IJ addresses - K not tested) interpolation
- It can modify your spindle speed if correctly set up and wired (not my case ) so not tried

Now i'm using Artcam Pro 2010 with G-code(arc) post processor, and it works perfectly.
The .tap g-code file start like this:

T1M6
G17
G0Z8.000
G0X0.000Y0.000S22000M3

And end like this:

G0Z100.000
G0X0.000Y0.000
M30

Here how looks a program:

T1M6
G17
G0Z8.000
G0X0.000Y0.000S21000M3
G0X46.617Y60.257Z2.000
G1Z0.000F250.0
G1X49.378Y66.939Z-0.300F600.0
X49.804
X52.565Y60.257
G0Z2.000
G0X46.617Y60.257
G1Z-0.300F250.0
G1X49.378Y66.939Z-0.600F600.0
X49.804
X52.565Y60.257
G0Z2.000
G0X46.617Y60.257
G1Z-0.600F250.0
G1X49.378Y66.939Z-0.900F600.0
X49.804
X52.565Y60.257
G0Z2.000
G0X46.617Y60.257
G1Z-0.900F250.0
G1X49.378Y66.939Z-1.200F600.0
X49.804
X52.565Y60.257
G0Z2.000
G0X46.617Y60.257
G1Z-1.200F250.0
G1X49.378Y66.939Z-1.500F600.0
X49.804
X52.565Y60.257
(...)
G0Z0.000
G3X67.687Y27.971I-5.178J-15.390F600.0
G1Z-3.000F250.0
G1X67.092Y27.963F600.0
G3X60.672Y26.514I0.526J-17.286
G3X58.505Y25.446I10.444J-23.927
G3X55.105Y23.393I27.199J-48.885
G2X51.750Y21.238I-144.956J221.934
G2X50.068Y20.235I-24.833J39.764
G2X47.993Y19.198I-11.483J20.379
G2X43.298Y17.639I-10.549J23.911
G2X39.309Y17.098I-4.858J20.845
G2X35.916Y17.340I-0.634J15.023
G2X33.430Y18.149I1.861J9.947
G2X29.587Y20.808I6.515J13.520
G2X27.839Y23.157I5.337J5.796
G2X27.013Y26.155I8.331J3.909
G2X26.939Y28.192I14.520J1.547
G2X27.172Y30.922I28.021J-1.015
G3X27.578Y34.068I-105.481J15.201
G3X27.673Y35.235I-23.823J2.532
G3X27.676Y36.926I-14.612J0.870
G3X27.309Y39.134I-10.290J-0.574
G3X26.661Y40.820I-9.726J-2.773
G3X26.209Y41.633I-8.452J-4.160
G3X25.395Y42.816I-14.202J-8.902
G2X23.896Y44.802I77.948J60.392
G1X23.718Y45.053
G0Z0.000
G2X23.069Y46.085I11.487J7.941F600.0
G2X22.424Y47.517I7.280J4.145
G2X21.919Y49.867I10.267J3.433
G1Z-3.000F250.0
G1X21.895Y50.139F600.0
G2X22.047Y53.283I13.207J0.938
G2X23.003Y56.869I20.135J-3.445
G2X24.647Y60.739I39.332J-14.429
G2X26.239Y63.988I190.614J-91.348
G2X27.396Y66.083I32.548J-16.619
G1X28.033Y67.115
G2X30.931Y71.079I33.430J-21.396
G2X33.427Y73.811I29.993J-24.886
G1X34.304Y74.656
G2X38.555Y78.032I22.679J-24.195
G2X39.528Y78.607I6.498J-9.877
G1X41.427Y79.575
X42.013Y79.909
G0Z80.000
G0X0.000Y0.000
M30

I've tried only this small amount of commands (G0 G1 G2IJ G3IJ F) but with this commands you can do everything. I hope that this can help for build up a post-processor for rhinocam and also for other users of this DSP.

Kent

[burhanmydecor]

Yes i have artcam, aspire, enroute and rhinocam with dsp controller post processor.

[burhanmydecor]

Yes i can help you

[delid]

i am using haas PP with rhinocam (i am newly using it) and it works on 2 axis milling with my dsp controlled machine. today i tried holes>drill with selecting points from rhino, the simulation was fine but cnc acted weird. it moved to first point and origin than 2nd point and origin and goes on.

would it be fixed if i use another PP, lets say PP for Mach3? or is there a custom PP?

thanks in adv

[delid]

HitachiSeiki PP seems working for drilling.

[CiscoJazz]

Hi Kent,
Never could get anything out of MecSoft - moved to BobCAD instead.

They are working with us - writing a pp for this dsp.

I'll keep you posted if interested.

Vicki

Hola Vicki yo tengo el mismo problema con RhinoCam y estoy por adquirir BobCad versión 31, quiero preguntarte que versión tienes y si te funcionó bien el postprocesador, cual usaste y si el servicio que te brindaron en BobCad fue satisfactorio.
Gracias y saludos

[CiscoJazz]

Hola Kent, estoy teniendo el mismo problema, pudiste solucionarlo con RhinoCam ?
Saludos

[CiscoJazz]

Hola sos13, tengo el mismo problema con mi DSP y RhinoCam, pudiste solucionarlo ? cómo ?
Saludos