- Need Help!- High speed spindle problem in HAAS VF2
-
Registered
High speed spindle problem in HAAS VF2
Hi guys,
I have a 2005 HAAS VF2 3 axis machine here. We bought this machine through an auction around 6 months ago. The machine runs good. Machine is rated to run at 10000rpm. The only problem is, when we put the spindle to more than 5000rpm, the machine shuts the spindle and gives the following messages.
1) 102 SERVOS OFF
2) 237 SPINDLE FOLLOWING ERROR( The error between the commanded spindle speed and the actual speed has exceeded the maximum allowable as set in Parameter 184)
Does anybody knows about this problem?
Thanks
Similar Threads:
-
-
Gold Member
Re: High speed spindle problem in HAAS VF2
You might have better luck in a Haas forum - this one caters to mostly hobby machines made by Charter Oak.
- Need Help!- High speed spindle problem in HAAS VF2
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules