600v dc for induction furnace


Results 1 to 4 of 4

Thread: 600v dc for induction furnace

  1. #1
    Registered
    Join Date
    Mar 2017
    Location
    Egypt
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default 600v dc for induction furnace

    hello every one ..

    i have 600v dc source with high current can i make an induction furnace with it instead of 3-phase and how it would look like

    thanks lot .

    Similar Threads:


  2. #2
    Member awerby's Avatar
    Join Date
    Apr 2004
    Posts
    5728
    Downloads
    0
    Uploads
    0

    Default Re: 600v dc for induction furnace

    I don't think there's any requirement for 3-phase electricity to run an induction furnace. You generally start with a DC power supply and invert it to get high-current low voltage AC. Your source might work if you can transform it to the right specs. You might need to change the frequency as well, depending on how much metal you plan to melt at a time. Here's a guide for Do-It-Yourself induction heater building you might find helpful: Induction Heater

    [FONT=Verdana]Andrew Werby[/FONT]
    [URL="http://www.computersculpture.com/"]Website[/URL]


  3. #3
    Community Moderator Al_The_Man's Avatar
    Join Date
    Dec 2003
    Location
    Canada
    Posts
    24216
    Downloads
    0
    Uploads
    0

    Default Re: 600v dc for induction furnace

    The power and frequency is usually designed around the nature of the work that requires heating, from a 100lb steel ingot using 120Hz to case hardening where high frequency is used, or a silver soldering applications.
    Al..

    CNC, Mechatronics Integration and Custom Machine Design

    “Logic will get you from A to B. Imagination will take you everywhere.”
    Albert E.


  4. #4
    Registered
    Join Date
    Mar 2017
    Location
    Egypt
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default Re: 600v dc for induction furnace

    hello awerby..

    thanks for fast reply .. iam looking forward to make a medium sized furnace in order to make heat-treatment not a diy as mentioned in the graph.
    sorry iam a mechanical engineer and zero in electronics so iwant a detailed discription for the circuit ..

    thanks..



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

600v dc for induction furnace

600v dc for induction furnace