LinkBack URL
About LinkBacks
E-mail me the stl and i'll have a look.
| | |
Im trying to generate gcode from a stl file and its milling it from the side. How can I get it to mill the right surface?
E-mail me the stl and i'll have a look.
"A Helicopter Hovers Above The Ground, Kind Of Like A Brick Doesn't"
Greetings From Down Under
Dave Drain
Akela Australia Pty. Ltd.
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
I thought I had replied already, must be deja vu.
I got the right plane working, I used the rotate on axis command but now Im having trouble getting the X and Y axis in the right orientation.
Posting Permissions
| | |
