| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| Carken Products (Deskam, DeskCNC etc) Sub-Forums: Deskam, DeskCNC, DeskArt |
| | |
| This forum is sponsored by: |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
 
11-20-2005, 12:36 AM
| |||
| |||
| DeskCNC bug or Windows? Hello, When on the CAM page in DeskCNC and running a cut program, or even when just jogging, the tool path will shoot lines off vertically once in a while. I am using steppers, so no encoders to do such a thing, right? It doesn't seem to affect the part being milled, just that the tool path screen will look goofy, but who knows what else may be going on... I was wondering if others have experienced this. Also, I'm running Win 98. Thanks, John    |
|
#2
11-20-2005, 09:44 AM
| |||
| |||
| What version of DeskCNC? There were some interim builds about a year ago that had a display problem like this. Past stable builds are archived at the DeskCNC download link on the imsrv.com web site. Fred Smith - IMService http://www.cadcamcadcam.com/hobby |
|
#4
11-25-2005, 10:59 PM
| |||
| |||
| Upgrade to a newer version, at least 2.133 (2.0.1.33). This is archived on our web site at http://www.imsrv.com. Request the demo to locate the archives. There is no charge for the upgrade. Fred Smith - IMService http://www.cadcamcadcam.com/hobby |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
| | |
Linear Mode
