Requesting help with DeskCNC ???

[Burnit0017]

Greetings, I am new to DeskCNC. I am trying to work through the .dxf tutorial and I receive a error message of “ Radius at end of Arc differs from radius to start on line 12” and the tool path is not display when I select the Edit Mode. How is this issue resolved? Thank you for any help received.

[M250cnc]

I do not know DeskCNC but your error is to do with your IJ mode

DeskCNC has to be set the the same as the output from your CAM software

Phil

[Dylwad]

That is strange, I only get that message when deleting lines of G code by hand, or trying to draw circles using G code alone.

What post processor is it set to, it should be ISO G-code non-modal its under Setup/options/misc

I just tried it set to ISO G-code absolute arc centers and got the error message, works fine in non-modal.

@M250cnc~ Deskcnc is both the CAM and machine control software.

[rooboy]

hi there, i get the same message but only if i create toolpaths, zero machine,move gantry off 0,0,0, go back and change tool path (eg set new cut depth) then click "run machine".I will never get this error if i leave gantry ay 0,0,0 befor returning to edit mode. I use desk cnc on one 8x4 120amp plasma and 8x4 multicam every day for a living and find it fast and simple, some minor complaints but for the money it's a FANTASTIC unit

[Burnit0017]

Greetings, I was side tracked on other projects for a few months, I am back working with DeskCNC. I am just using the CAM to create the G-code. I use a different controller software. I was able to resolve the problem thank you for the assistance. Enjoy the day.