LinkBack URL
About LinkBacks
Hi Jepro,
Clarke's Building and Cabinets in Arborfield, Sask has a cnc router. I do not have the phone number handy but they should be listed.
| | |
Hello iv just started building speaker cabinets and I need to have some of the cuts done by cnc router.. If anyone knows a private or pro cnc shop in any of the 3 provs. please let me know.
thank you
Hi Jepro,
Clarke's Building and Cabinets in Arborfield, Sask has a cnc router. I do not have the phone number handy but they should be listed.
First you get good, then you get fast. Then grouchiness sets in.
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Hi jepro.
Im Mike i work in a shop and do all of the rograming and operating of the cnc. Any parts that you need cut i would be more than happy to be of service to you. We have good turn around time and parts cut to perfection. I am confident that I can cut these for you with no problem. Can you send me a dwg or dxf to mikejr@ontargetestimating.com
Hello. I also have a CNC router and it sounds like we can make those parts for you. Send us detail on this project at; icwllc@yahoo.com
Thank you.
Posting Permissions
| | |
