Two of these should work.
Precision Acme Threaded Bars - Acme Threaded Rods & Nuts | MSCDirect.com
I'M Dan from Quebec, QC.
I started building a CNC Solsylva 25X25 and all my parts are ordered
I ordered Monday at McMaster-Carr 4 ACME rod but yesterday they told me they did not send me my order since I live in canada
All my parts is for this 3/8-8 Acme 4 starts Rod grrrr
So i'm trying the following too
QBS : pending
nookind : $300 Minimum order requirement
snbinc : The amount you require would not qualify
precisionspindleinc : pending
this is the complet specs for the rods :
(And i need 3X36'' and 1X 12'')
Carbon Steel Precision Acme Threaded Rod, 3/8"-8 Size, 1/2" Travel/Turn, 3' L, Right-Hand Thread, 4 Starts
Type Precision Acme Threaded Rods
System of Measurement Inch Acme Size 3/8"-8
Thread Direction Right Hand
Thread Start Type Fast Travel
Multiple Start Travel Distance Per Turn 1/2"
Speed Ratio (Starts) 4:1
Thread Fit 2C (Self-Centering)
Mach3 2010 Screenset
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Thanks for the answer ger21
for the same price I finally found a store for all "Quebecers"
this is GBS . ca