looking for a mirror finish on my EDM sinker


Results 1 to 4 of 4

Thread: looking for a mirror finish on my EDM sinker

  1. #1
    Registered
    Join Date
    Jul 2017
    Location
    Canada
    Posts
    12
    Downloads
    0
    Uploads
    0

    Default looking for a mirror finish on my EDM sinker

    Hello everybody

    im using a sinker EDM to make my project and i need a mirror finish because its impossible to polish the part afther
    i got a copper electrode on a steel workpiece

    if someone know some parameter for help me ....i got a " not bad" finish but im looking for better

    thank a lot

    Similar Threads:


  2. #2
    Member mactec54's Avatar
    Join Date
    Jan 2005
    Location
    USA
    Posts
    15362
    Downloads
    0
    Uploads
    0

    Default Re: looking for a mirror finish on my EDM sinker

    Quote Originally Posted by millathes View Post
    Hello everybody

    im using a sinker EDM to make my project and i need a mirror finish because its impossible to polish the part afther
    i got a copper electrode on a steel workpiece

    if someone know some parameter for help me ....i got a " not bad" finish but im looking for better

    thank a lot
    Your EDM machine would have to have that capability, it's not something all EDM machines can do, on the older machines it was a add on extra, check your manual to see if your machine has mirror finishing

    Mactec54


  3. #3
    Registered
    Join Date
    Jul 2017
    Location
    Canada
    Posts
    12
    Downloads
    0
    Uploads
    0

    Default Re: looking for a mirror finish on my EDM sinker

    my machine is a knuth edm znc 250 and i got a button mirror on the controller but i dont know how to set it up



  4. #4
    Member
    Join Date
    May 2018
    Location
    United States
    Posts
    7
    Downloads
    0
    Uploads
    0

    Default Re: looking for a mirror finish on my EDM sinker

    Our company just bought this same machine and nobody knows how to operate it. The manual is very basic about setup and the price for someone from the company to come in for training is too expensive for our small shop. D you have any information or know of any videos that would be helpful? I would appreciate any help.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

looking for a mirror finish on my EDM sinker

looking for a mirror finish on my EDM sinker