North America review of my YS-1325-Wood Working CNC Router


Results 1 to 5 of 5

Thread: review of my YS-1325-Wood Working CNC Router

  1. #1
    Registered slowdigits2's Avatar
    Join Date
    Nov 2014
    Location
    canada
    Posts
    74
    Downloads
    0
    Uploads
    0

    Talking review of my YS-1325-Wood Working CNC Router

    Well I finally got my Machine hooked up and running after some delay because of damage during shipping but Jack Dong from Shandong Yishun CNC Machinery CO., Ltd. where I purchased it from made sure all parts were replaced and made sure I was happy with everything, I had to install he gantry because it taken off to ship, they walked through every step of the way, after everything that was broke was replaced one of their engineers connected to my pc via Team viewer and mad all the necessary configurations to motors and homing limits and stayed till was happy with everything, I hope to upload a video soon of it running just need a little practice an busy with the honey do list, Over all my experience with Jack Dong as very Good I would recommend him to anyone, the overall of the machine I would rate an 8, there are a few small things such wrong washers being used in hold down slots , not a lot of English manuals, cables and wiring running through holes that were cut that have very rough edge's and should have been protected better, lack of fans in the cabinet cooling, I think its a very solid machine, may not be top of the line but I did not pay top of line price, I have included a few pics If anyone has any comments I would be glad to here them or question's I will try to answer them
    Thanks
    Steve

    YS-1325 CNC Router wood working

    1, T-Slot Table for 5/16 t bolt
    2, Transmisson : XY Axis Rack Gear Z Axis German Neef Ballscrew
    3, XYZ Axis Square rail: 25mm Taiwan HIWIN Square Rail

    4, 5.5kw Water cool spindle
    5, Delta Inverter
    6, Yako drivers
    7, 450c Stepper Motor
    8, Manual Oil System
    9, Full Sets of Collets ER20
    10, Full Sets of Wood working cutter
    11, rotary Diameter 340mm
    12 Mach 3 with all motor setting pre installed
    13, 3hp dust collector
    14 100' of 6" anti staic hose for dust collector

    15 dust boot for spindle

    Similar Threads:
      Attached Thumbnails Attached Thumbnails review of my YS-1325-Wood Working CNC Router-pic_20160518_133236_783-jpg   review of my YS-1325-Wood Working CNC Router-pic_20160518_133241_045-jpg   review of my YS-1325-Wood Working CNC Router-pic_20160518_133301_afd-jpg   review of my YS-1325-Wood Working CNC Router-pic_20160518_134329_446-jpg  

      review of my YS-1325-Wood Working CNC Router-pic_20160518_134455_8cc-jpg   review of my YS-1325-Wood Working CNC Router-pic_20160518_134451_14e-jpg   review of my YS-1325-Wood Working CNC Router-pic_20160518_103517_b39-jpg   review of my YS-1325-Wood Working CNC Router-pic_20160518_134039_87a-jpg  



    • #2
      Registered Jack_YsCNC's Avatar
      Join Date
      Feb 2016
      Location
      China
      Posts
      37
      Downloads
      0
      Uploads
      0

      Default Re: review of my YS-1325-Wood Working CNC Router

      Thank you sir, for post this review.

      working on client's sample.

      just done.

      here is the video.



      Last edited by Jack_YsCNC; 08-23-2016 at 12:03 AM.
      Shandong Yishun CNC Machinery Co.,Ltd Email: JACK.DONG@YSCNCROUTER.COM
      Whats App&Mobile: 0086-137-9314-0576 Skype: YSCNC05


    • #3
      *Registered User* frpaolini3's Avatar
      Join Date
      Sep 2018
      Posts
      1
      Downloads
      0
      Uploads
      0

      Default Re: review of my YS-1325-Wood Working CNC Router

      Hey Steve, I wanted to see how you were making out with your machine, I was looking at purchasing a 1325 very similar specs to yours?



    • #4

      Default Re: review of my YS-1325-Wood Working CNC Router

      We have 1325 machine in Chicago

      https://www.automationtechnologiesin...5-cnc-machine/

      USA Tech Support: 847-984-0882

      1: Brand New CNC Router Engraving Machine ,T slot, Vacuum Table, Rack/Pinion

      2: 3 .2 KW Water Cooled Spindle + 3.2 KW 400Hz Variable Frequency Driver

      3: We changed this Machine to Mach3 or 4 Control , DB25 Breakout board with Relay and Spindle control with Ethernet You can use 32 bit or 64 bit connection. or we can update to Centroid Software

      4: Mach3 Software is not included

      X,Y axis working area

      1300mm*2500mm (51.2" x 98.4")

      Z axis working area

      200mm ( about 8")

      Table size

      1440mm*3000mm

      Max. speed

      14m/Min

      Max. working speed

      12m/Min

      Working accuracy

      0.01mm

      Repositioning accuracy

      0.05mm

      Feeding height

      120mm

      Command code

      G code

      Software

      working with Mach3 software with Windows 64 or 32 bit

      Working power

      4000W

      Working voltage

      AC220V/50HZ/60HZ

      Water Cooled Spindle power

      3.2 KW

      Spindle running speed

      8000-24000

      Spindle Power Motor: 3.2KW, Water-Cooled, ER20 Collet Chuck

      Spindle Speed: 0-24000 rpm With VFD, AC220V/50Hz/60HZ

      X, Y, Z axis driver: Stepper Motor Driver, NEMA34 Stepper Motor

      X, Y Z Limit Switch

      E- Stop, Z Height Probe

      X Axis: Rack Pinion

      Y Axis: helical rack and pinion with 5:1 Gearhead, See Pictures

      Z Axis 20m Linear Rail with 25mm Ballscrew

      Attachment 402284Attachment 402284

      Last edited by automationtechinc; 09-17-2018 at 04:41 PM.


    • #5
      Registered slowdigits2's Avatar
      Join Date
      Nov 2014
      Location
      canada
      Posts
      74
      Downloads
      0
      Uploads
      0

      Default Re: review of my YS-1325-Wood Working CNC Router

      Quote Originally Posted by frpaolini3 View Post
      Hey Steve, I wanted to see how you were making out with your machine, I was looking at purchasing a 1325 very similar specs to yours?
      The machine runs fairly decent received a lot of damage being shipped they used bricks as packing, bearings went after 1 year in spindle no warranty bed damage it did not run out of the box like promised but i guess thats what you get for going overseas



    Tags for this Thread

    Posting Permissions

    • You may not post new threads
    • You may not post replies
    • You may not post attachments
    • You may not edit your posts
    •  


    About CNCzone.com

      We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

    Follow us on


    Our Brands

    review of my YS-1325-Wood Working CNC Router

    review of my YS-1325-Wood Working CNC Router