need quote,


Results 1 to 11 of 11

Thread: need quote,

  1. #1
    Registered mike2768's Avatar
    Join Date
    Oct 2008
    Location
    Canada
    Posts
    248
    Downloads
    0
    Uploads
    0

    Default need quote,

    Hello everyone, I'm in need of a quote for a straight forward cnc plasma table cutting job. please see attached the DXF of my parts. I will also insert an image for hole placement, because sometimes when I send a dxf the hole don't come with the drawing so I put crosshairs at the hole location and give a image for hole sizes. This needs to be made in either 3/16" or 1/4" steel i would rather have the 1/4". I hope this works. I see I forgot a crosshair on the smaller part that hole is centered on the 4 hole the hole needs to be 3/4" thanks.

    -2 parts of each drawing. may lead to more

    Thanks to everyone,
    Mike

    need quote,-new-gantry-uprights-jpg

    Similar Threads:
    Attached Files Attached Files
    Last edited by mike2768; 02-16-2014 at 07:17 PM.


  2. #2
    Registered mike2768's Avatar
    Join Date
    Oct 2008
    Location
    Canada
    Posts
    248
    Downloads
    0
    Uploads
    0

    Default

    This can also be cut in 1/4" 6061 aluminum on water jet



  3. #3

    Default

    Mike,

    I tried responding to your message but your inbox is full, please email me when you have the time.

    Thanks



  4. #4
    Registered mike2768's Avatar
    Join Date
    Oct 2008
    Location
    Canada
    Posts
    248
    Downloads
    0
    Uploads
    0

    Default

    Sorry I cleaned it up



  5. #5
    Monkeywrench Technician DareBee's Avatar
    Join Date
    Jan 2004
    Location
    Stratford, Ont. Canada
    Posts
    3154
    Downloads
    0
    Uploads
    0

    Default

    There are no dimensions?
    I suppose I could scale your picture but i don't feel like it.
    Do you feel like providing some overalls?

    www.integratedmechanical.ca


  6. #6
    Registered mike2768's Avatar
    Join Date
    Oct 2008
    Location
    Canada
    Posts
    248
    Downloads
    0
    Uploads
    0

    Default

    need quote,-gantry-upright-2-jpg



  7. #7
    Registered mike2768's Avatar
    Join Date
    Oct 2008
    Location
    Canada
    Posts
    248
    Downloads
    0
    Uploads
    0

    Default need quote,

    Well it's happened. I got parts machine from one of the replies here in my post (nextdaycnc) and they turned out awesome. But now the second set of parts I think he took my $$$$ and screwed me. I paid on Apr 15 and haven't even seen a reply to emails I've sent him there's been no contacted from them at all. That figures my last set of parts to finish my machine and the last of the $$$ funds to put this new machine together. Now it's gone and machine not finished, I don't know what the hell I'll do now need quote,need quote, All these years doing business on line and now I get screwed. Maybe someone knows the business and can help me out.



  8. #8
    Member
    Join Date
    Jan 2007
    Location
    Canada
    Posts
    599
    Downloads
    0
    Uploads
    0

    Default Re: need quote,

    where abouts you located?



  9. #9
    Registered mike2768's Avatar
    Join Date
    Oct 2008
    Location
    Canada
    Posts
    248
    Downloads
    0
    Uploads
    0

    Default Re: need quote,

    Ontario Canada about 1 hour north of Toronto



  10. #10
    Member
    Join Date
    Jan 2007
    Location
    Canada
    Posts
    599
    Downloads
    0
    Uploads
    0

    Default Re: need quote,

    well if you were on my side of Canada, I might think about showing you that dealing locally and supporting local business can have benefits. Too bad.....



  11. #11
    Registered mike2768's Avatar
    Join Date
    Oct 2008
    Location
    Canada
    Posts
    248
    Downloads
    0
    Uploads
    0

    Default Re: need quote,

    I did try keeping it local, and I wanted to keep local, but everyone I got quotes from where crazy expensive. I paid $425, here they wanted closer to $700 mark. Why guys have to charge so much is beyond me, that's why sometimes company's do the hole china switch you know. Right or wrong that's what is happening. Like I said above I wanted to keep local, as I was on a tight budget. Anyways thanks anyways.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

need quote,

need quote,