Please Help! I Need A Post!

[mdlmkr]

I need a post for a Fagor 8055C controller REAL BAD!!!!

I am using it on a DMS 5 axis router. My machine isnt running and I cant seem to get a post from anyone.

If there is someone out there that can forward me the post, it would be greatly appreciated.

[ltmquik]

Originally Posted by mdlmkr I need a post for a Fagor 8055C controller REAL BAD!!!! I am using it on a DMS 5 axis router. My machine isnt running and I cant seem to get a post from anyone. If there is someone out there that can forward me the post, it would be greatly appreciated.

Do you have anything close? Do you have any sample code that I could look at? Finally, do you know what bias, such as Fanuc, the controller is?

I have worked on some 5-axis posts for others. I can give it a try.

Jeff

[ericm7030]

You could see if you can find a source file on Teksoft's website. http://www.teksoft.com/misc_files.htm
You may be able to find something close that will work for your needs. They are in zipped files. The .src file and ctl, lng files are included.

[mdlmkr]

Thanks guys, I sorted it out. Getting the post was only half of it. Now I need to adjust to posting in World Coordinates!