How to post out separate H & D numbers? Camworks - UPG - Fanuc +30 to Tool number?
Anyone have a post that adds 20 or 30 to Tool number in order to have seperate H and D numbers in order to not scrap out parts by accidnet by comping 15" radially? LOL I'm tired of manually editing my code everyday...
I have UPG but I can't use the help file in Windows so I can't sell teach myself.. And I've been searching the forums and google for hours...
Any suggestions or help would be greatly appreciated! Thanks in advance!
Re: How to post out separate H & D numbers? Camworks - UPG - Fanuc +30 to Tool number
Hmm, a quick test got me modified H numbers, but I'm not sure how best to change the T number as it is setup differently and is the base for the H and D numbers.
The easiest thing would be to either set H at +20 or to set H at -20 and just use tool numbers starting at 21.
I suppose the important question is whether you have the source file (.src) for your current post or if you can start with one of UPG's generic posts and not need to much customization.