Screen size ?? What to expect? - CNCzone.com-The Largest Machinist Community on the net!

murphy625 · #1 04-12-2005, 10:31 AM

I have designed my interface at 800x600 resolution on a 19" monitor.

What's going to happen when I plug this in with a 15" flat screen or an older 15" monitor?

I was reading the Camsoft manual and it was indicating that there could be a "sizing" problem with different monitors..

Does anyone have any experience with this?

EDIT: and one more question, has anyone ever tried to put this thing on dual screens ? WinXP is compatible with this if you have 2 of the same video cards.. Will the camsoft screen split ?

Thanks,
Murphy

camsoft · #2 04-12-2005, 11:14 AM

Murphy,

You'll be fine with a new monitor of any size. It is the resolution that matters. We have a 105" screen here in our class room and it shows the same as a 17" monitor.

Tech Support
CamSoft Corp.
(951) 674-8100
support@camsoftcorp.com
www.cnccontrols.com

murphy625 · #3 04-12-2005, 11:41 AM

Oh that's a good thing.. Whew! thanks...
I take it you guys have never tried the dual screen thing?
Murphy

Al_The_Man · #4 04-12-2005, 12:20 PM

Usually you get the same full display, as long as the resolution is the same.
Al

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Does size really matter?	DAB_Design	General Electronics Discussion	2	03-20-2005 05:27 PM
for engraving pcb which is a good thread size for the lead screw?	NickLatech	DIY-CNC Router Table Machines	11	01-17-2005 09:37 PM
Ballscrew size -vs- project size	Alan T.	CNC Machining Centers	4	10-18-2004 09:53 PM
pcboards and screen printing	lurch	General Electronics Discussion	1	10-17-2004 02:40 AM
What size steppers?	cnczoner	General Metal Working Machines	6	05-19-2004 12:32 AM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)