other than Galil

[bobk]

Can I customize Camsoft to work with control boards other than the Galil boards already set in the program? I have a machine with an old motion control board and I would like to run my Camsoft software on it.

[camsoft]

Bob

Yes, we have drivers for motion boards other than Galil plus several IO boards as well.

To find out for sure write us with your company name & serial number and we'll look up what software and version you have along with a description of the motion board you want to use.


Tech Support
CamSoft Corp.
support@camsoftcorp.com
PH 951-674-8100
Fax 951-674-3110
www.cnccontrols.com

[bobk]

Originally Posted by camsoft Bob Yes, we have drivers for motion boards other than Galil plus several IO boards as well. To find out for sure write us with your company name & serial number and we'll look up what software and version you have along with a description of the motion board you want to use. Tech Support CamSoft Corp. support@camsoftcorp.com PH 951-674-8100 Fax 951-674-3110 www.cnccontrols.com

I sent my information via. e-mail, I hope you get it! If you do not have the files for this board is it possible for the user to configure the software themselves to accept different boards.