LinkBack URL
About LinkBacksDear Camsoft, Yes I would like the post processor as this would make exploring AS3000 more profitable for me. Thanks DavidAnyone else using AS3000?
Dear Camsoft, Yes I would like the post processor as this would make exploring AS3000 more profitable for me. Thanks David
Last edited by camsoft; 08-03-2005 at 06:06 PM.
David,
Okay, no problem, we get it ready to send.
Make the request through the front office here and give them your e-mail address and we get this to you by the end of the day.
Tech Support
CamSoft Corp.
(951) 674-8100
support@camsoftcorp.com
www.cnccontrols.com
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
I actually had a customer that upgraded to level 30 and recieved on site CamSoft training.Originally Posted by dmerrll
Darek
I have AS3000 from camsoft. Its pretty good for 2D and basic 3D. It's the fastest Cad/Cam system I have ever learned, but I only have Level-1. I like their cnc control products and the more I get into AS3000 I find things to use. But there is plenty of other packages out there for 3D mold work and I would look at a few more before I upgraded my AS3000 to a higher level. Not there yet maybe one day. AS3000 is okay for now.
Bob
Posting Permissions
