My Project

[Mbock]

I am just at the end on my project here. I would like to thank all the people posting here. This forum helped me a bunch with going through this setup, what I didn't find here I called Camsoft for help on. They were a great help. I am refitting a shear with a new control for the backgauge. The Camsoft software seemed to be the right choice for this and now I am glad I chose it. I will have 4 more of these to do. I am going to make an attempt at attaching a few photos of my electrical cabinet here. I also installed the PC and drives in the enclosure as well, then installed an external VGA port and 2 usb ports. I believe it looks fairly clean. Thanks again for all the information I found here.

p.s. It is snowing here again this morning in MN.

[Karl_T]

Do you give tours? I'd like to see a shear application

[Mbock]

I can, I will update you when I have it all installed completely. I have to get them to shut down the shear for a couple days. I have everything in order,(I believe) to make it a fairly rapid upgrade. We have a fair sized facility here, actually have 2 here in Fergus Falls and 3 in Ky. I will let you know when it is running.