Originally Posted by
lizvern
The response for \55 is 23552 which is where I have it set. I have tried using the accel command in my G1 and in the startup.fil, I had the accel and decel at 1000 and the machine could not even reach full rapid travel in around 100 inches which is really slow accel and decel and the machine still jerks on takeoff, is this normal for the machine or should it accel a bit. I have even contacted Galil and they have been trying to give some commands that might work but no luck there either. It does not seem as if accel is to be used during the G1.