Tool Turret


Results 1 to 3 of 3

Thread: Tool Turret

  1. #1
    Member
    Join Date
    Sep 2011
    Location
    egypt
    Posts
    9
    Downloads
    0
    Uploads
    0

    Default Tool Turret

    please, I need turret encoder with 12 positions with binary output 24 v DC.
    It is preferable to get it from EUCHNER ,I need the model which enable me to get outputs with Binary code for each tool as following :

    T1 1000
    T2 0100
    T3 1100
    T4 0010
    T5 1010
    T6 0110
    T7 1110
    T8 0001
    T9 1001
    T10 0101
    T11 1101
    T12 0011

    I hope that you can help me to get the model , specifications and connections .

    THANKS


    Similar Threads:


  2. #2
    Member Karl_T's Avatar
    Join Date
    Mar 2004
    Location
    Dassel.MN
    Posts
    1542
    Downloads
    2
    Uploads
    0

    Default Re: Tool Turret



  3. #3
    Member
    Join Date
    Sep 2011
    Location
    egypt
    Posts
    9
    Downloads
    0
    Uploads
    0

    Default Re: Tool Turret

    Thank you for your reply.
    the required encoder has axial shaft.
    output format : absolute - parallel output with natural binary code with cable .

    12 positions not 12 bit (only 4 bits) .



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Tool Turret

Tool Turret