I'm a newby on this cnc and camcad but i will get to it with a bit of perceverance and the help of this forum.
Please see attached screenshots
The object is in red and in blue is the toolpath, the intriging thing are the 2 arcs cercled in red that the toopath shows that the tcutting tool went inside the object.
Is this something grong in my setting, if you note thatthese are the only 2 inside arcs all the others arcs are ok !!
I managed to get further with Cambam, but now I do get an understendable glitch once I generate toolpath with Cambam it looks great and producea gcode.
Once the gcode is loaded in mach3 the display only shows only one cutout in this case the circle on top of the frame.
Please see enclosed photo.
In this instance I decided to generate a profile for outside cutout and one profile for the inside cutout, for the outside cutout it works fine but not the inside cutout.
Hope some can clarify this for me