First off thanks for any and all the reply, I'm wondering if Cambam can do what I want seems simple to me maybe just don't understand the software that well, What I'm trying to do is make a poker chip tray out of a solid piece cherry or maple or some other hardwood I have measure various chips came up with a good width to take in account the variations the width would be 1.542", the depth of the slot would be 0.750" I would like to hold 25 chips which would be a length of the slot 4.125" and 4 slots in each tray (100 chips) stackable would be awesome I realize I would have to make something so when I flip the trays over to machine the other side they would be located in the same position to a depth of 0.5" same width of 4.125" material thickness would be 1.5" total length of block would be 8.047" .375" space between rows and at ends I'm sure someone here could whip this up in a few minutes which would be great but I would also like to learn how to draw concaves in a solid surface


Thanks again everyone that replies

Similar Threads: