Videos and Photos of camaster shops and machines

[cabnet636]

yes flogging or mop sanders

jim

[Khalid]

hmmm i just searched through the internet.. its really very handy tool.. i will go to market to check for the sanding wheel...i think the is will easily attached to the pencil grinder..

[KustomKoncepts]

yes flogging or mop sanders

jim

is there another Slangor name for these? I searched Flogging and Mop and get no results even Grizzley don't pull anything. Where do you get these?

Are they sand paper or a rubber abrasive. Thanks Later

I now will be looking at the hardware stores and Maybe I can come across them. I just have not thought to look before..

[KustomKoncepts]

I think I found them on Wood Craft

http://www.woodcraft.com/family.aspx...fcode=08INSHCP

[cabnet636]

thats it but i pay a lot less than that!!

jim

[cabnet636]

here is source

http://www.klingspor.com/products/klgprspec.htm

[cabnet636]

my new x3 in action

"http://www.youtube.com/watch?v=tUntpv09FnY"]YouTube - M2U00240

"http://www.youtube.com/watch?v=Sku-gFA7qnM"]YouTube - CAMaster x3 plenum table

[cabnet636]

"http://www.youtube.com/watch?v=9jh5K338Tp0"]YouTube - second tool change

[rrrevels]

Jim, do you ever sleep? I thought I was an early bird.

Russ

[cabnet636]

guy @ new wave woodworking made this vid with his new recoil camaster lathe

"http://www.youtube.com/watch?v=2RIPsZHinSc"]YouTube - CAMaster

[cabnet636]

did this while we were at iwf, show a real good explanation of the X3, cabinetmakers and machine owners did the booth parts!!

CAMaster has really hit a home run with this machine, there is a four head in development with two z's this will allow for duplication work and multi drilling at the same time, this is a real big deal for us in the cabinet world, my intent is to finance them to build me a machine with a dovetailer as well!!

other machine companies will soon duplicate this but bill got it right!!! and should be considered a leader in this, most of these companies will have problems with the settings and such, josh is light years ahead of them on this!!

jim


"http://www.youtube.com/watch?v=6U9_OopBf-k&feature=related"]YouTube - CAMaster X3 From IWF 2008

way to cool!!

"http://www.youtube.com/watch?v=oCiOrC-rR08&feature=rec-HM-fresh+div"]YouTube - THIS OLD SHOP

[cabnet636]

we are doing a house with an awful lot of carvings and details, i will document it and show the results when we are finished. here are some columns 9x72 with moorish details and will have burl inlay when done.



jim

"http://www.youtube.com/watch?v=4GUFUB0mEOs&feature=channel_page"]YouTube - Raad master bath columns

here is the new video joey is working on

"http://www.youtube.com/watch?v=64Es7BERIUE"]YouTube - CAMaster Welcome