Page 1 of 2 12 LastLast
Results 1 to 12 of 19

Thread: Camaster Contacts????????

  1. #1
    Registered
    Join Date
    Oct 2004
    Location
    USA
    Posts
    11
    Downloads
    0
    Uploads
    0

    Camaster Contacts????????

    I have called and emailed this company several times over the last 2 months with no reply to my inquiries about machinery. No returned phone calls or emails. Are they still in business??????? Does anyone have any contact information? I'm not impressed so far with sales service.


  2. #2
    Registered
    Join Date
    Oct 2007
    Location
    usa
    Posts
    2,384
    Downloads
    0
    Uploads
    0
    i speak with them daily, i am sure theres a good reason you must not be getting thru, i do know they are swamped with email and web request, send me a pm with your contact info and i'll get you in touch!!

    tthese photos were taken day before yesterday, send me a pm!! or call me on website phone #

    i spoke with 15 camaster owners in the last 24 hours. and i am easy to get a hold of

    jim mcgrew
    www.mcgrewwoodwork.com
    www.camheads.org
    Attached Thumbnails Attached Thumbnails Camaster Contacts????????-pict0843.jpg   Camaster Contacts????????-pict0840.jpg  


  3. #3
    Registered
    Join Date
    Oct 2007
    Location
    usa
    Posts
    2,384
    Downloads
    0
    Uploads
    0
    sent you a pm sam!! are you sure it's camaster you are trying to reach!!

    jim


  4. #4
    Registered
    Join Date
    Oct 2004
    Location
    USA
    Posts
    11
    Downloads
    0
    Uploads
    0
    Yes its Camaster. I get put into an automated teller and sent to voicemail and never get a callback. Can you private email me a contact phone number that isn't hooked to a automated teller. Thanks


  • #5
    Registered
    Join Date
    Oct 2007
    Location
    usa
    Posts
    2,384
    Downloads
    0
    Uploads
    0
    sam i pm'd you my phone number, please pm me the number you are calling

    the camaster number is 866 405 7688 it is after 5 in georgia, and during the day the number is forwarded to joey's phone if he is not in the office i spoke to him while i was driving home i'll have him here in a moment!!
    James McGrew CAMaster 508 ATC
    www.mcgrewwoodwork.com https://www.dropcam.com/p/PFmTOV


  • #6
    Company Representative Cut to the Bone's Avatar
    Join Date
    Jan 2008
    Location
    USA
    Posts
    122
    Downloads
    0
    Uploads
    0

    SAM

    I am sorry about you not being able to get ahold of some one at CAMaster. I can not explane why there is a mix up but i can ashure you that it is a mistake i will fix. We value all customers old & new. and very much the potential ones. Jim (cabnet636) called me on my Cell @ 7pm to let me know about your post. I do extend my appoliges and ask you to contact me.
    My direct e-mail is joeyjarrard@camaster.com please e-mail me you contact info and I will call.

    Thanks
    Joey


  • #7
    Registered
    Join Date
    Oct 2008
    Location
    usa
    Posts
    6
    Downloads
    0
    Uploads
    0

    Camaster trouble

    I have trouble getting in touch with them also.
    Last edited by cruzan; 10-25-2008 at 06:37 PM.


  • #8
    Registered
    Join Date
    Oct 2007
    Location
    usa
    Posts
    2,384
    Downloads
    0
    Uploads
    0
    cruzan, it is now time to report you to the forum moderators as you are untruthful and have yet to respond to any legitimate request for info on your "supposed router" i am well known in columbia south carolina as a cabinetmaker for many years and have reported well on cnc zone since november 07 and the history of my relationship is well documented on many forums, should you actually have a camaster router which i believe was never sold to you by any person related to camaster sales or otherwise.

    may we actually see a photo of your router

    here is the previous thread to which you never responded

    camaster help

    just in case he comes back this was his post before deleting

    " #1 10-10-2008, 07:02 PM
    cruzan Join Date: Oct 2008
    Location: usa
    Posts: 4


    camaster help

    --------------------------------------------------------------------------------

    I hope I'm posting in the right place. I joined here today to try to get some help with my cammaster router. www.camaster.com..

    I spoke with another person having trouble with them also and he there me there may be somebody on here using the camaster. Does anybody have one of these???

    I have spent alot of time on the phone and emailing with the actual manufaturer in China but they can not help much because camaster has made changes to the router. The Manufacturer says that camaster has only sold a couple routers so I feel like a guinea pig.

    I have been having nothing but trouble with the router and they are no help.. It has been two months since I received the router and it is yet to run at all.

    I am going to post on all the forums to try to get some help before having too.. Thank you for any help. I am a small shop and this was very large investment for me. "

    and here is the otherone

    #2 10-10-2008, 06:32 PM
    cruzan Join Date: Oct 2008
    Location: usa
    Posts: 4


    I just joined here today to try to get some help with my cammaster router. www.camaster.com I have learned that it is the same people who used to be known as "warthog".

    I learned from another forum that somebody else took over the warthog name and now bill and josh glenn are importing routers made in China, calling them camaster and marking up the price.

    I dont know if you bought from the Glenns or the new person at warthog? are you having trouble too.

    I have been having nothing but trouble with the router and they are no help. Do you know anything about these?I have spent alot of time on the phone and emailing with the actual manufaturer in China but they can not help much because camaster has made changes to the router.

    If you think you can help me let me know a number I can reach you at? I am going to post on all the forums to try to get some help too.. Thank you for any help.




    and please show us all any actual pm's i have sent you

    here is the only pm i ever sent you

    Private Message: camaster
    Recipients: cruzan

    10-10-2008, 07:04 PM
    cabnet636 Join Date: Oct 2007
    Location: usa
    Posts: 1,146


    camaster

    --------------------------------------------------------------------------------

    my name is jim mcgrew
    803 518 2074
    tell me what i can do to help you with your router

    www.mcgrewwoodwork.com


    moderators if you do not mind please leave this post by cruzan so we can find out what his real intentions are. he may be related to "carvin marvin"

    jim mcgrew
    www.mcgrewwoodwork.com
    member AWI
    Last edited by cabnet636; 10-26-2008 at 09:14 PM.
    James McGrew CAMaster 508 ATC
    www.mcgrewwoodwork.com https://www.dropcam.com/p/PFmTOV


  • #9
    Registered
    Join Date
    Oct 2007
    Location
    usa
    Posts
    2,384
    Downloads
    0
    Uploads
    0
    cruzan, as far as being a "prolific" well my wife agree's with you on that but since you brought it up!!

    i have posted on woodweb since the mid 90's when it was a fore runner to the woodworking industry as an exchange of ideas using the internet. i further post on shopbot, vectric and sawmill creek. most all of my discussions on camaster are done on cnc zone on the camaster and excitech threads where i have been posting since before i purchased my camaster machine, i further post on www.camheads.org where i am a moderator for info related to camaster owners. this site is autonomous of www.camaster.com

    how can we help you with your machine today!!

    jim mcgrew
    James McGrew CAMaster 508 ATC
    www.mcgrewwoodwork.com https://www.dropcam.com/p/PFmTOV


  • #10
    Registered
    Join Date
    May 2008
    Location
    USA
    Posts
    50
    Downloads
    0
    Uploads
    0
    Cruzan, I don't work for and am not a cheerleader for Camaster, but if you are going to slander a company on a public forum, I think you should give us more information to prove you actually have any business to do with them.. Like, do you live in Miami (the Camaster guys have mentioned they haven't sold a machine down there), so did you get it somewhere else and move there? What exact model of machine did you get, and what year is the manufacture? And what is the problem with it?

    If you are to the stage of 'banding together with an attorney", then surely you could provide the forum of some semblance of proof that you've ever done business with Camaster. If not, I just have to consider it slander for reasons unknown.


  • #11
    Registered
    Join Date
    Nov 2007
    Location
    USA
    Posts
    50
    Downloads
    0
    Uploads
    0

    To anyone interested

    Hello guys !
    My name is Keith Godwin. I own Godwin Cabinet Shop, Inc. in Camden, SC. My address is 2296 Jefferson Davis Hwy. I have owned a Camaster since October 2006. My machine is one of the imports they were selling at that time. I have been very happy with my machine. Yes, there have been some bumps in the road but everytime I call and ask for help that's what I get. Bill, Joey, Paul and Josh are always there to help. They don't always have a perfect answer for everything but they sure do try. They are GOOD people and I do not believe for a minute that they would refuse help to anyone. I've seen them help people that don't even own Camaster machines. They build all their machines now. The new 3 head machine is awesome and if I can ever afford to upgrade you can bet I'm calling Bill Glenn! As for Jim McGrew, you couldn't find a more genuine and helpful person on the face of this earth. I know Jim personally and will vouch for him anyday. If some of you that have bad things to say about him would actually look at his past posts you would find that 99% of them are for useful information or to directly assist someone. Any attorney in his right mind would tell you disenters to jump in the lake! In the mean time, take Jim up on his offer. He'll do exactley what he said he would do. Also, actually give Camaster a call. They will help if you call.


  • #12
    Registered
    Join Date
    Oct 2007
    Location
    usa
    Posts
    2,384
    Downloads
    0
    Uploads
    0
    geee kieth, you'll make me cry!

    as for attorney's and disenters there are none, it's a bogus post!

    by the way what did i do in the other 1% of my post?

    jim
    James McGrew CAMaster 508 ATC
    www.mcgrewwoodwork.com https://www.dropcam.com/p/PFmTOV


  • Page 1 of 2 12 LastLast

    Similar Threads

    1. Camaster
      By sngatlanta in forum Camaster
      Replies: 627
      Last Post: 02-25-2012, 08:44 PM
    2. camaster help
      By cruzan in forum Camaster
      Replies: 3
      Last Post: 10-11-2008, 11:27 AM
    3. Contacts in Central California
      By bothunter in forum Mentors & Apprentice Locator
      Replies: 3
      Last Post: 05-03-2008, 02:48 PM
    4. IH Contacts
      By IHCNC in forum Industrial Hobbies (Support forum)
      Replies: 0
      Last Post: 04-17-2008, 02:25 PM
    5. Replies: 5
      Last Post: 01-07-2006, 07:55 AM

    Posting Permissions


     


    About CNCzone.com

      We are the largest and most active discussion forum from DIY CNC Machines to the Cad/Cam software to run them. The site is 100% free to join and use, so join today!

    Follow us on

    Facebook Dribbble RSS Feed


    Search Engine Friendly URLs by vBSEO ©2011, Crawlability, Inc.