need help setting up Camaster CNC in Indianapolis


Results 1 to 7 of 7

Thread: need help setting up Camaster CNC in Indianapolis

  1. #1
    Registered
    Join Date
    Apr 2015
    Posts
    3
    Downloads
    0
    Uploads
    0

    Default need help setting up Camaster CNC in Indianapolis

    Good morning,
    we recently purchased a used Camaster CNC 6x12 router. We knew it needed some things but thought everything was pretty much there...we are finding out that its not really the case. We have all the servo's and actual parts for the machine but the hardware aspect is what is lacking apparently. We believe that all we need is a Galil card DMC 1842 and then we should be able to move forward. However we really just don't know as this is our first machine and know nothing about them. We have reached out to Camaster but apparently this machine was build by the previous owner of the company so they cannot really offer any help. Anyone around that can help us? We just want to get this thing running and have called/emaied just about everyone we can find with not much result.

    thanks

    Similar Threads:


  2. #2
    Member
    Join Date
    Jan 2008
    Location
    USA
    Posts
    940
    Downloads
    0
    Uploads
    0

    Default Re: need help setting up Camaster CNC in Indianapolis

    They told me that Camaster was never sold so they may be trying to get out of supporting your machine even though they claim to lifetime support even on used equipment. Jim Mcgrew should point you to where you want to get as he is one of the spokesmen for Camaster and pushes his company.



  3. #3
    Member cabnet636's Avatar
    Join Date
    Oct 2007
    Location
    usa
    Posts
    2466
    Downloads
    0
    Uploads
    0

    Default Re: need help setting up Camaster CNC in Indianapolis

    I have reason to think I spoke with this fellow and this is a Warthog 6 x 12 built in Tennessee, Not by anyone from CAMaster after 2007. you can send me some photos but it will take a good bit of work to get it right at this point. you may want to consider hiring a retrofitter to do this. I have had CAMasters since they were new and I have never heard of the Card you mention. No one is dodging this unfortunately there is more to the story.

    James McGrew CAMaster 508 ATC
    www.mcgrewwoodwork.com http://dropc.am/p/EJaKyl


  4. #4
    Member
    Join Date
    Aug 2009
    Location
    Canada
    Posts
    655
    Downloads
    0
    Uploads
    0

    Default Re: need help setting up Camaster CNC in Indianapolis

    At any rate those were usually stepper machines with no atc I'm guessing. Any cnc technician should be able to rig up a new system, though I'd do some research on what control systems you would like and then find a technician that can do it. I'm a Centroid fan myself (in that I like mine and I'm glad I didn't pay for it originally) but much cheaper ways exist.

    In case anyone is wondering, I'm the twin of the other gfacer on cnczone...


  5. #5
    Member cabnet636's Avatar
    Join Date
    Oct 2007
    Location
    usa
    Posts
    2466
    Downloads
    0
    Uploads
    0

    Default Re: need help setting up Camaster CNC in Indianapolis

    Having Spoken to this Owner and seeing Photographs, He has a CAMaster Pro built before the current Owners took the company to the machines built today, it is a Heck of a good machine and basically in New condition. A previous owner had an Employee take the operation computer as a Hidden Prize (sometimes called theft and Vandalism) Good news is a new computer and PCI card and this Baby will cut Again !! No Jerry No story here !

    Put him in touch with the right people and with a little hookup he will be making chips with this machine..

    Oh and Hey if you decide to sell that Monster call me !!

    Attached Thumbnails Attached Thumbnails need help setting up Camaster CNC in Indianapolis-img_0084-jpg  
    James McGrew CAMaster 508 ATC
    www.mcgrewwoodwork.com http://dropc.am/p/EJaKyl


  6. #6
    Registered
    Join Date
    Apr 2015
    Posts
    3
    Downloads
    0
    Uploads
    0

    Default

    Thanks so much man!!! You have been a great help. I can't wait to get this thing back up and running. Ps guess I'm not the only one that never sleeps




    Quote Originally Posted by cabnet636 View Post
    Having Spoken to this Owner and seeing Photographs, He has a CAMaster Pro built before the current Owners took the company to the machines built today, it is a Heck of a good machine and basically in New condition. A previous owner had an Employee take the operation computer as a Hidden Prize (sometimes called theft and Vandalism) Good news is a new computer and PCI card and this Baby will cut Again !! No Jerry No story here !

    Put him in touch with the right people and with a little hookup he will be making chips with this machine..

    Oh and Hey if you decide to sell that Monster call me !!




  7. #7
    Member cabnet636's Avatar
    Join Date
    Oct 2007
    Location
    usa
    Posts
    2466
    Downloads
    0
    Uploads
    0

    Default Re: need help setting up Camaster CNC in Indianapolis

    I sent the info to Johann and some others Join the CAMheads forum,, you are a CAMaster owner ! the company cannot just outright support this machine but all the components and software are the same they still use !

    James McGrew CAMaster 508 ATC
    www.mcgrewwoodwork.com http://dropc.am/p/EJaKyl


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

need help setting up Camaster CNC in Indianapolis

need help setting up Camaster CNC in Indianapolis