LinkBack URL
About LinkBacks
yes we hung it and brought it back to the shop to finish the rope boarder, will put it back up next week,
| | |
Have you put the 2 halves together yet? If you can, put up a pic of the finished piece.
http://paul-flores.com/
yes we hung it and brought it back to the shop to finish the rope boarder, will put it back up next week,
James McGrew CAMaster 508 ATC
www.mcgrewwoodwork.com https://www.dropcam.com/p/PFmTOV
got this done in january sorry it took so long to post!!
James McGrew CAMaster 508 ATC
www.mcgrewwoodwork.com https://www.dropcam.com/p/PFmTOV
Amazing work, that is definitely something to be proud of. I noticed the wings aren't flat against the wall, did you flip it over and route it on the CNC or was that done by hand with a grinder or something?
http://paul-flores.com/
actually, the wings "sprung" forward a bit when the tension was released after the cutout !! some of it is done with a hand held 4" grinder and a 36 grit disk. i call it the "mean ass material remover"
James McGrew CAMaster 508 ATC
www.mcgrewwoodwork.com https://www.dropcam.com/p/PFmTOV
Posting Permissions
| | |
