Ziess CMM-Eclipse

[kevinb]

I recently purchased a Ziess CMM at an auction. We had a Ziess tech prep the machine for moving and moved it in the shop. Two weeks later we had the tech set it up and do a basic check. The machine came with calypso software version 3 but no manuals or tutorials. The tech said there are training manuals and a test block that teaches how to set-up and use Calypso software. Does anyone know where I can get a hold of any kind of training help such as this. Maybe there's a copy laying in the bottom of somebodys desk with a test block in a cabinete somewere.
Any help would be greatly appriciated. This CMM is incredable but I need to figure out how to use it.

Thank You Kevin BBTool

[bbern]

I'm by no means a Zeiss guru, but I think the CMM model is an Eclipse. It probably has either U-mess or Calypso as software.

Lots of info here
http://www.cmmtalk.com

[kevinb]

sorry made a mistake, yes it is calipso version 3

[kevinb]

Thank You

Kevin

[bbern]

Kevin,
Also some REALLY good stuff here

http://www.jhtools.com/cmm_pages/zeissDownloads.htm

Bill

[kevinb]

I went to CMMtalk.com but it wouldn't let me register. Other people are having the same problem. This place looks like a great place to start.

Thank You Kevin