Dose anyone make Precision Height Gage Pins


Results 1 to 3 of 3

Thread: Dose anyone make Precision Height Gage Pins

  1. #1
    Member
    Join Date
    Mar 2014
    Posts
    26
    Downloads
    0
    Uploads
    0

    Default Dose anyone make Precision Height Gage Pins

    Is there anyone who makes precision pin gages to check length instead of the diameter? I am needing one that need to be 1.000 long and needs to be certified. For my application the body needs to be around .500 but again the diameter will not be gaging anything. We are not able to use gage blocks for this application, that is why we are looking for a round pin type.. Thanks in advance for any information !!

    Similar Threads:


  2. #2
    Member
    Join Date
    Aug 2007
    Location
    US
    Posts
    27
    Downloads
    5
    Uploads
    0

    Default Re: Dose anyone make Precision Height Gage Pins

    you can try using a calibration standard used for calibrating 1-2” micrometers but I’m not sure if the are certified.



  3. #3
    Member
    Join Date
    Mar 2014
    Posts
    26
    Downloads
    0
    Uploads
    0

    Default Re: Dose anyone make Precision Height Gage Pins

    Yes we thought of that but the Diameter is .250 and we need a diameterof .500 for our application



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Dose anyone make Precision Height Gage Pins

Dose anyone make Precision Height Gage Pins