Cadkey conversion utility - Page 2 - CNCzone.com-The Largest Machinist Community on the net!

djconklin · #13 06-01-2009, 03:13 PM

Originally Posted by bostosh

I would go from cadkey r7.prt to cadkey19.prt to IGS, STEP, Sat or other upwards format. Send me a file.

Thanx for the advice! If all else fails I'll try that.

The problem right now is that the files were on a computer that is so old that only of the computers we have recognizes the old HD--but, its a VISTA and I can't get into DOS!

Paddy · #14 11-22-2010, 05:37 AM

I have the utilities if you still require them.

bostosh · #15 11-22-2010, 12:58 PM

I still use cadkey 19 to blast out geometry easily and find that IGES goes out to McamX3 and back into Cadkey,
but the solids are more reliable on the newer systems.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
EZ Trak DX Utility Menu	Claud F. Day	Bridgeport and Hardinge Mills	1	09-21-2007 07:18 AM
Utility blades	quadbob	General Metalwork Discussion	3	09-09-2006 05:40 PM
Need a Utility	grumpy74	FeatureCAM CAD/CAM	2	03-11-2006 09:56 AM
4 axis verify utility?	DAB_Design	General CNC (Mill and Lathe) Control Software (NC)	6	04-27-2005 12:38 AM
a little freeware utility	eriskouma	General CAM Discussion	1	11-17-2003 09:39 AM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)